+34 644 507 888
+34 91 417 04 02
WhatsApp +34 644 507 888
Call + 34 972 25 62 12
🇪🇸 - Select your language
- Select your language
- Wähle deine Sprache
???????? - Choose your language
🇵🇹 – Select your language
🇳🇱 – Selecteer je taal
- Välj ditt språk
- Wybierz swój język
Table of Contents
2 Types of Earpieces
This model includes two models of earpieces, the nano and the vip pro supermini. Each model best fits one type of situation.
The nano earpiece is 3mm in size and the vip pro supermini is 1,10x0,64cm. The two earpieces adapt to the ear, being completely hidden.
Integrated Battery in the Collar
The Nano V6 inductor collar integrates a rechargeable battery inside. This battery can be 100% charged in approximately 1 hour.
Operation by Electromagnetic Induction
The inductive collar emits inductive waves to the earpiece. The nano earpiece does not require charging and the vip pro supermini requires a battery with 4 hours of autonomy.
GSM Necklace with SIM Card
The Nano V6 neckloop requires a Nano SIM card for phone calls.
Autonomy of 4 hours
The autonomy of the collar is approximately 4 hours. The induction collar must be turned off when not in use and while charging.
1 – Puller Magnet
2 – Nano Earpiece Extractor Bar
3 – Nano earpieces (2 magnetic units)
4 – Nano V6 Inductor Collar
5 - USB Cable
6 – Vip Pro SuperMini earpiece
7 – 2 Batteries 337/SR416SW
Check that it is a original PingaOculto product checking that the brand that appears on the cards included with the product is the same as the one in the image.
If you have doubts about whether the product is original, you can contact us by attaching an image and we will verify it. Contact us via: WhatsApp +34 644 507 888 o Email.
To use the SIM card with the Kit it is need to temporarily remove the SIM pin code. You can find the setting on your mobile in security, privacy or similar settings. If you don't find the option, search in google: "remove sim card pin code + mobile model/brand".
Introducing a Nano SIM card according orientation that appears in the image. The Nano SIM will be correctly inserted when you hear a click. For extract it push Nano SIM card in until you hear a click. You can use the included clip.
When inserting the Nano SIM card the induction collar turns on automatically and appears a red led. Wait approximately 10 seconds for it to start.
Two types of earpiece are included in this model, being able to choose the one you prefer according to the situation. The Nano Penguin offers little volume and can only be used in noise-free environments like exams or libraries. The Vip Pro SuperMini Earpiece offers more volume and can be used in environments with or without noise.
Select the earpiece model you prefer to see the configuration steps
Unscrew the black cap from the earpiece and insert the stack with the positive pole facing upwards. Then screw the cap back on checking let it remain correctly screwed.
The battery begins to be consumed from the moment it is inserted on the earpiece and should withdraw if not to be used to avoid downloading. The model of the battery that the earpiece requires is 337-SR416SW.
Bring the earpiece to your ear and check that you can hear a sound similar to an untuned radio. This sound indicates that you are powered on and working properly.
⚠ If the sound is very loud, it can be heard without the earpiece in your ear, unscrew the cap and check that the battery is oriented with the positive pole + facing up and screw the cap back on carefully. If the lid or the battery are not aligned it will make this noise.
⚠ If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive pole + facing up and screw the cover back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.
Place the Kit on the body as it appears in the image, remembering that the inductor element should always be on the neck under clothing so that the earpiece receives the sound.
Call from a mobile to the phone number of the SIM card and it will be answered automatically.
For more security it is recommended to fix the inductor element with cloth or plastic tape to your skin so that it does not move during use. For repeated use you can even sew it to sweatshirts or jackets. Remember that the Induction Collar is not washable.
If the call is not heard by the earpiece, but you do hear the sound of the radio without tuning, check that the inductor element is on the neck and with the volume at maximum. If you need more help contact us: WhatsApp +34 644 507 888 o Email.
If you cannot hear the sound similar to an untuned radio, check that the battery is inserted correctly with the positive + side facing up and screw the cap back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.
You are now done configuring the earpiece vip pro supermini. You can follow with instructions in:
The penguins (in the image indicated by the number 3) are the two smallest pieces and should part with the nail. You can find them in the Kit in a bag. Also included are extractor bar (2 in the picture) and the puller magnet (1 in the image).
Place together the Extractor Magnet and the two earpieces and place them in contact with the inductor element like in the image (part without buttons attached to the Nano V6 device by a cable). The extractor magnet, being also made of a piezoelectric material, reacts to inductive waves in the same way as the earpieces, vibrating and causing the sound, for this reason we will use it together with the earpieces to carry out the test.
The collar automatically answers the call after a few seconds.
Call from a mobile phone number of the Nano SIM card. Bring your ear closer to the extractor magnet and to the earpieces that are in contact with the inductor element and check if it is heard or vibrates when speaking from the mobile making the call.
Si vibrate and/or can be heard the kit It's working correctly.
If you do not hear the call from the earpiece, check that the inductor element is attached to the extractor magnet + earpieces. If it does not work, try another Nano SIM, check that it has a line and that the Nano SIM card does not have a pin code. Also try performing a full battery charge. If you need more help contact us: WhatsApp +34 644 507 888 o Email.
Enter first a penguin (only one of the two that appear in the image indicated by a 3) in the left ear (we hear better through the left ear than through the right) through the following procedure:
It may be necessary to spread this step several times
To check that the earpiece has been correctly inserted, put your hand to your ear (so that the earpiece does not fall to the ground) and turn your head to the opposite side. If the earpiece comes out of your ear easily when turning the head is that it has NOT been entered correctly. You must repeat the introduction steps.
also can check if it is correctly inserted by verifying that another person does not see the earpiece in the ear. If you can see it, DO NOT it is well introduced.
Tip: There are times when The earpiece just needs a little push to be correctly entered. If so, place the extractor magnet behind your ear, close to the neck. You will notice how the earpiece moves and you can finish placing it.
Tip 2: There are certain people who accumulate more amount of earwax, especially in the inner part of the ear, causing more difficult to introduce the earpiece. Remember clean the ear with Cleaning Sprays and sticks for the ears. Usually you will only need practice more to enter it correctly. If you can't enter it it is recommended that you have a ear cleaning to remove wax plugs.
If you can't enter it, contact us to help you: WhatsApp +34 644 507 888 o Email.
When the earpiece has been correctly inserted in the left ear, place the Kit as it appears in the image, remembering that the inductor element should always be on the neck under clothing so that the earpiece receives the sound.
Call from a mobile to the phone number of the SIM card and it will reply automatically.
If you hear very low, Also insert the other earpiece into the right ear.
(A single earpiece in the left ear is recommended, since when trying to insert one in each ear, the first one will be misplaced when introducing the second one). (It is VERY likely that if we do not hear well with an earpiece in the left ear, it is because we have not inserted the earpiece correctly, the induction collar does not have enough charge or the induction element is not in the neck).
You can use this device by phone call. He external microphone can be placed on the sleeve or on the neck.
To increase the volume the inductor element should be placed closer to the earpiece.
To decrease volume the inductor element must be located further from the earpiece.
La autonomy of the Nano V6 device is approximately 4 hours.
to load it connect it to the mains with the USB cable from the Kit. The estimated time of charge is 1-1,5 hours. The device is fully charged when the red charging light turns off. Remember to check that the Nano V6 is turned off while charging (Nano SIM card removed).
remove the earpiece approaching the extractor bar (indicated in the image with a 2) with puller magnet (indicated with a 1) at its base to the ear as you can see in the first image.
Another VERY effective extraction method es hold with one finger the puller magnet inside the ear and shake your head while keeping it rotated as in the second image. It can be hard to remove the first few times, but after several attempts it will succeed.
As well the earpiece may have already been removed and fallen to the ground, check if it is still in your ear by connecting the Kit and checking if you hear when playing a song at maximum volume.
If you cannot extract it, contact us to help you: WhatsApp +34 644 507 888 o Email.
It is recommended to clean the earpiece with water or alcohol, the extractor magnet and the extractor bar before and after each use for better hygiene.
Finally, remember to turn off the collar inductor to prevent discharge holding down the A button until a red light appears.
Remove the earpiece by pulling the transparent thread with your fingers. If you don't make it, you can try pulling of the transparent thread with a tweezer.
Finally, remember to disconnect the battery when you finish using the device to prevent it from downloading.
⚠ If you can't extract it, contact us to help you: WhatsApp +34 644 507 888 o Email.
If you have questions, don't hesitate to contact us! 😉
the penguins can be complex products when putting them into operation. Check below the nano v6 earpiece frequent problems vip pro supermini.
It can be due to several reasons. Perform the following checks:
Nano earpieces work because of the material they are made of, a piezoelectric material, and not due to any internal electronics in the earpieces. For this reason it is impossible for nano earpieces not to work and The problem will be the inductor collar or the mobile. Follow the steps and tests indicated in the next section (3 – I can't hear anything or very low).
Si vip pro supermini earpiece does not work follow the checks below:
The battery begins to be consumed from the moment it is inserted in the earpiece and must be removed if it is not going to be used to avoid its discharge. The model of the stack is 337-SR416SW.
With which of the two earpieces are you experiencing the problem?
Check that you have separated the earpieces (indicated in the image with the number 3), which are the two smallest pieces. You can find them in an accessory bag in the kit.
Call from a mobile phone number of the SIM card. Bring your ear closer to the extractor magnet and to the earpieces that are in contact with the inductor element and check if it is heard or vibrates when speaking from the mobile making the call.
If in the previous step when carrying out the test you have noticed how the extractor magnet together with the earpieces vibrate or sound, the kit is working correctly and the problem is:
If you hear the sound similar to an untuned radio by putting the earpiece in your ear with the battery inserted, the earpiece is working
Place the inductor element on the neck and the earpiece on the ear and checking that the Nano SIM card is inserted, call the phone number of the inserted SIM.
If one earpiece works, the other works too. This is because the earpieces work because of the material they are made of, a piezoelectric material, and not due to any internal electronics in the earpieces. The material reacts to the inductive waves of the induction collar by vibrating and making sound.
Most likely, the earpiece has not been correctly inserted into the earOr this let's hear more for one than for another (normally we hear more through the left ear than through the right).
If the volume obtained by the earpiece in one ear is sufficient, it is recommended to use it with a single earpiece and save the other spare.
The wired microphone works like a handsfree for phone calls. It is recommended check that it has not been clogged with clothing and try to do the call in loudspeaker mode with another mobile.
You may have to try several times until it is successfully removed.
remove the earpiece approaching the extractor bar (indicated in the image with a 2) with puller magnet (indicated with a 1) at its base to the ear as you can see in the picture.
Most likely, has stayed on and the battery has been depleted. Perform a full charge.
If you have already verified that you have a charge follow the steps indicated in section 3 -I can't hear anything or very low of frequent problems.
If the Kit does not work, contact us to help you: WhatsApp +34 644 507 888 o Email.
Below is the important product information in relation to the security and compliance that guarantee proper and safe use of the product:
⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.
Commercial Company: PingOc Now SL
® PingaOculto. All rights reserved.
Address: Calle Lucio del Valle 12, Local 1, 28003, Madrid, Spain.
Model Name: Nano V6 + Vip Pro SuperMini
Model Number: N-16
Product identifier: B09Y4SQTD4
Product battery: Integrated Lithium-Ion type with 500 mAh capacity
Electrical Rating: Power: 100-240V 50/60Hz 0.15A
Batteries Included: 2 x Silver Oxide Batteries type 337-SR416SW
Operating temperature: 0 to 35ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Legal notice: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in compliance with Directive 2014/53/UE.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email firstname.lastname@example.org, Call/WhatsApp +34 644 507 888.
Limited Warranty: All official PingaOculto brand items have a 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: email@example.com or by Call/WhatsApp: +34 644 507 888.
On orders to the Peninsula of +€15
Up to 14 calendar days
Quick and Efficient Management
PayPal / MasterCard / Visa