Instructions Vip Pro Mini External Microphone 📋

🇪🇸 - Select your language

- Select your language

- Wähle deine Sprache

???????? - Choose your language

🇵🇹 – Select your language

🇳🇱 – Selecteer je taal

- Välj ditt språk

- Wybierz swój język

Table of Contents

1 Instructions Vip Pro Mini External Microphone 📋

What is a Vip Pro Mini External Microphone Earpiece?

A vip pro mini earpiece is a auricular cordless with reduced size of only 1,14×0,7cm which is inserted into the ear, remaining hidden. This type of hidden headphones are usually used for cheating in exams, use in presentations, espionage… The Vip Pro Mini Earpiece is the most popular of the vip pro earpieces and one of the best sellers due to its simple operation. This kit includes a red and green 3.5mm jack adapter to connect the choke collar and the external wired microphone, achieving hidden communication with whispers.

How does the Vip Pro Mini Earpiece Work?

the penguins work using technology electromagnetic induction. The inductor collar generates an inductive wave that will cause an amplified vibration in the earpieces, resulting in sound. Thanks to induction technology we can use hidden earpieces with a very small size and resistant to inhibitors.

Is the Vip Pro Mini Earpiece Safe?

Yes, the vip pro mini earpiece has the size suitable for insertion into the ear and includes a transparent thread for its extraction with the fingers or with a tweezers in case it has been very inserted. This penguin not waterproof and should be cleaned with the battery removed using a dry cloth or a damp cloth with alcohol so as not to damage it.

Technical characteristics

The vip pro mini earpiece is a conical-shaped headset with a reduced size of 1,14×0,7cm. Remains totally hidden being invisible from the outside.

The vip pro mini earpiece requires a battery for its funtionability. Two are included with the kit and you can purchase more on our website or at watch stores.

The inducing collar emits inductive waves his amplified by the earpiece generating sound. The device requires a battery.

The connection between the induction collar and the mobile phone is made through the 3.5mm jack connector. If you use a mobile phone without this connector, you can use a adapter.

The autonomy of the earpiece is approximately 4 hours depending on volume. The battery must be disconnected from the earpiece when not in use.

Kit Contents

1 – Vip Pro Induction Necklace

2 – Vip Pro Mini Earpiece

3 – 2 Batteries 337/SR416SW

4 – Jack adapter

5 – External microphone

Instructions

Step 0 - PingaOculto Original Product

Check that it is a original PingaOculto product checking that the brand that appears on the cards included with the product is the same as the one in the image.

If you have doubts about whether the product is original, you can contact us by attaching an image and we will verify it. Contact us via: WhatsApp +34 644 098 320 o Email.

Step 1 - Stack Introduction

Unscrew the black cap from the earpiece and insert the stack with the positive pole facing upwards. Then screw the cap back on checking let it remain correctly screwed.

The battery begins to be consumed from the moment it is inserted on the earpiece and should withdraw if not to be used to avoid downloading. The model of the battery that the earpiece requires is 337-SR416SW.

Step 2 - Operation Check

This sound similar to an untuned radio is normal in all Vip Pro Earpieces. It is due to the constant amplification of the inductive waves emitted by the inductive collar. this sound decreases when playing a recording or call and when the battery charge is getting low

Bring the earpiece to your ear and check that you can hear a sound similar to an untuned radio. This sound indicates that you are powered on and working properly.

⚠ If the sound is very loud, it can be heard without the earpiece in your ear, unscrew the cap and check that the battery is oriented with the positive pole + facing up and screw the cap back on carefully. If the lid or the battery are not aligned it will make this noise.

⚠ If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive pole + facing up and screw the cover back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.

Step 3 - Introducing the Earpiece

Insert the earpiece into the left ear. You can also insert it on the right, but we usually hear more on the left than on the right. You can push the earpiece with your finger. It is not recommended to insert it too much, since it is not necessary to hide it.

Step 4 - Mobile/MP3 Connection

Plug it in the inductor collar in the green connector and the microphone in the red connector. Remove the cover of your mobile, since it can prevent the correct connection. If your mobile needs an adapter, verify that it works with other headphones to rule out a problem with the same and verify that it is original.

Place the Kit on your body as it appears in the image. remember it is essential that the inductor collar is on the neck under the clothes so that the earpiece receives the sound of its mobile by induction.

⚠ In some iPhone models, a compatibility failure has been detected in the use of the device with non-original adapters when making a phone call. You need to use an original adapter or use another mobile.

Step 5 - Function Test

Play a song on your mobile/MP3 and while playing turn up the volume to the maximum from your mobile. Check if it is heard on the earpiece.

⚠ If the song is not heard through the earpiece, but you do hear the sound of the radio without tuning, check that you have the induction collar on your neck and that the mobile is correctly connected and with the volume at maximum. If it doesn't work try another mobile. If you need more help contact us: WhatsApp +34 644 098 320 o Email.

⚠ If you cannot hear the sound similar to a radio without tuning, check that the battery is correctly inserted with the positive pole + facing up and screw the cover back on carefully. If the lid is not correctly aligned it will make this noise. Check that the battery is charged and try the other battery included in the Kit.

Step 6 - Multifunction Button

The inductor collar button It will not work if the red/green connector is used. this button there's no need, being able reply the call From the phone.

You can use this Kit by phone call or with recordings. He external microphone you can put it in the sleeve or neck and remove cap so that it occupies less. The button allows:

1 Click: Answer call or Pause/Play recordings.
2 Clicks: Next recording.
3 Clicks. Previous recording.

⚠ Some functions may not be available on some mobiles, especially iPhones and mobile models that require an adapter to connect to the induction collar. Try another mobile or control the call/recording directly from the mobile.

Step 7 - Earpiece Removal and Battery Disconnect

Remove the earpiece by pulling the transparent thread with your fingers. If you don't make it, you can try pulling of the transparent thread with a tweezer.

Finally, remember to disconnect the battery when you finish using the device to prevent it from downloading.

⚠ If you can't extract it, contact us to help you: WhatsApp +34 644 098 320 o Email.

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Frequent Problems

the penguins can be complex products when putting them into operation. Check below the Frequent problems with the vip pro mini microphone earpiece.

1 - The calls are not heard but the songs or recordings are heard

Si manages to hear the recordings or songs through the earpiece, but not the phone calls, check:

If you are using iPhone, el adapter used to connect the red/green adapter It is original.
If you are using another mobile, check that the adapter is original or from good quality.
check if it works connecting the inductor collar directly to the mobile, without red/green adapter. It works, check that you are entering the microphone in the red connector and the collar in the green.
Try another mobile and check that the settings when making the phone call on your mobile are correct.

⚠ If it doesn't work, try another mobile. If you need more help contact us: WhatsApp +34 644 098 320 o Email.

2 - Doesn't work

Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you should use a new battery.
check if it works connecting the inductor collar directly to the mobile, without red/green adapter. It works, check that you are entering the microphone in the red connector and the collar in the green.
Unscrew the black cap from the earpiece and insert the stack with the positive pole facing upwards.
Screw the cap back on checking let it remain correctly screwed.
If you hear the sound similar to an untuned radio by putting the earpiece in your ear with the battery inserted, the earpiece is working and the problem will be another. Follow the steps indicated in the next section (3 – I can't hear anything or very low).

The battery begins to be consumed from the moment it is inserted in the earpiece and must be removed if it is not going to be used to avoid its discharge. The battery model that the earpiece requires is 337-SR416SW.

3 - I can't hear anything or very low

This is one of the most common problems in the penguins exist several possible reasons for which you hear nothing or very little. We are going to carry out a series of tests:

Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you should use a new battery.
check if it works connecting the inductor collar directly to the mobile, without red/green adapter. It works, check that you are entering the microphone in the red connector and the collar in the green.
Unscrew the black cap from the earpiece and insert the stack with the positive pole facing upwards.
Screw the cap back on checking let it remain correctly screwed.

If you hear the sound similar to an untuned radio by putting the earpiece in your ear with the battery inserted, the earpiece is working

Place the induction collar on the neck and the earpiece in the ear and checking that it is correctly connected to the mobile play a song at maximum volume on your mobile.

⚠ The battery begins to be consumed from the moment it is inserted in the earpiece and must be removed if it is not going to be used to avoid its discharge. The model of the stack is 337-SR416SW.

4 - I hear a Sound like a Bee

If the sound is very loud and is similar to the sound of a bee Unscrew the cap and check that the battery is oriented with the positive pole + facing up and screw the cap back on carefully. If the lid is not correctly aligned it will make this noise.

5 - The button does not work or does not work as it should

The inductor collar button It will not work if the red/green connector is used. this button there's no need, being able reply the call From the phone.

⚠ With the red/green adapter it will not work the button of the induction collar. Use the mobile directly.
⚠ Some functions may not be available on some mobiles, especially iPhones and models of phones that require an adapter to connect to the induction collar. Try another mobile or control the call/recording directly from the mobile.

You can use this Kit by phone call or with recordings. He integrated microphone is located behind the push button. The button allows:

1 Click: Answer call or Pause/Play recordings.
2 Clicks: Next recording.
3 Clicks. Previous recording.

6 - External microphone does not work

El external microphone must connect to red connector of the induction collar. try if it works removing the cover of your mobile to ensure the correct connection and test it in phone call and in the original mobile recording application to rule out a problem with the call or its configuration.

⚠ If it doesn't work, try another mobile. If you need more help contact us: WhatsApp +34 644 098 320 o Email.

7 - I can't extract the earpiece

Remove the earpiece by pulling the transparent thread with your fingers. If you don't make it, you can try pulling of the transparent thread with a tweezer.

Finally, remember to disconnect the battery when you finish using the device to prevent it from downloading.

⚠ If you can't extract it, contact us to help you: WhatsApp +34 644 098 320 o Email.

8 - The Earpiece has stopped working

Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you should use a new battery.
Verify that earwax is not clogging the speaker of the earpiece. If so, clean it carefully using a needle or pin.
If you hear the sound similar to an untuned radio by putting the earpiece in your ear with the battery inserted, the earpiece is working and the problem will be another. Follow the steps indicated in the next section (3 – I can't hear anything or very low).

The battery begins to be consumed from the moment it is inserted in the earpiece and must be removed if it is not going to be used to avoid its discharge. The model of the battery that the earpiece requires is 337-SR416SW.

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Security and Compliance

Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:

🇪🇸 - Select your language

- Select your language

- Wähle deine Sprache

???????? - Choose your language

🇵🇹 – Select your language

🇳🇱 – Selecteer je taal

- Välj ditt språk

- Wybierz swój język

⚠ FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER DAMAGE OR INJURY.

⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.

Commercial Company: PingOc Now SL

Address: Calle Lucio del Valle 12, Local 1, 28003, Madrid, Spain.

Product specifications:

Model Name: Vip Pro Mini Microphone

Model Number: VP-02

Product identifier: B08J8FQLBV

Batteries Included: 2 x Silver Oxide Batteries type 337-SR416SW

Operating temperature: 0 to 35ºC

Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.

Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.

For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in compliance with Directive 2014/53/UE.

Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.

How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.

Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.

Limited Warranty: All official PingaOculto brand items have a 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.

Find Out More

Do you want to contact us?

follow us on