Spy Earpieces
Instructions for the Nano Bluetooth Inductor Piece Earpiece
Thank you for choosing our product. If you need assistance or have any questions, please don't hesitate to contact us. We'll be happy to help.
Content
- 1 Instructions for the Nano Bluetooth Inductor Piece Earpiece
- 1.1 Description
- 1.2 Features
- 1.3 Content
- 1.4 Instructions
- 1.5 Videotutorial
- 1.6 Frequent Problems
- 1.6.1 1 - Bluetooth device not listed
- 1.6.2 2 - The calls are not heard but the songs or recordings are heard
- 1.6.3 3 - Doesn't work
- 1.6.4 3 - I can't hear anything or very low
- 1.6.5 4 - I only hear out of one ear / earpiece
- 1.6.6 5 - A very loud sound sounds, like a bee
- 1.6.7 6 - The microphone does not work
- 1.6.8 7 - I can't extract the earpiece
- 1.6.9 8 - The Inducer Piece has stopped working
- 1.6.10 Problems with the product? Contact us
- 1.7 Security and Compliance
Description
The Nano Bluetooth Inductor Earpiece is the ideal solution for those looking for an ultra-discreet, wireless device. Measuring just 3 mm, the earpiece fits completely into the ear canal, allowing for recordings or calls in complete privacy. The inductor connects to your mobile phone or MP3 player via Bluetooth and transmits sound to the earpiece using electromagnetic induction.
The built-in microphone allows for whispering, ideal for situations requiring covert communication. The induction unit is compact, rechargeable, and offers up to 4 hours of battery life. There's no need to charge the earpiece, as it works through the vibration generated by the induction. This system guarantees a comfortable, efficient, and secure experience for those looking to keep their communications hidden.
Features
Ultra-discreet design: Minimal-sized earpiece that remains completely hidden inside the ear canal.
Bluetooth connection: Compatible with mobile devices and MP3 players for wireless calls or audio playback.
Microphone integrated into the induction piece: It allows you to communicate through whispers naturally and without being detected.
Electromagnetic induction technology: Stable sound transmission, resistant to interference and inhibitors.
High Definition Sound: Clear, seamless audio quality, ideal for situations requiring maximum confidentiality.
Endurance: The induction unit has a rechargeable battery that lasts up to 4 hours continuously. The earpiece doesn't need to be charged, as it's activated by induction.
Content
1 – Puller Magnet
2 – Extractor Bar
3 – Nano earpieces (2 magnetic units)
4 – Bluetooth Inductor Piece
5 – USB charging cable
+ Vip Pro SuperMini/UltraMini earpiece
6 – Vip Pro SuperMini or UltraMini earpiece
7 – 2 Batteries 337/SR416SW
Instructions
Step 0 - Original Product
Check that it is a original product of PingaOculto checking the brand that appears on the product.
If you have any doubts about whether it is original, you can contact us and we will verify it.
Step 1 - Power On and Connection
The induction stone is shipped with low or no charge, It is recommended to charge it before its first use. (See Step 6)
Turn on the Bluetooth Induction Piece holding down the button for at least 4 seconds, until the Blue LED flashes (If it doesn't turn on, charge it with the included cable and charger for at least 1 hour). Next, go to your mobile phone's Bluetooth settings and connect it to a device called “V8".
Once you connect the mobile phone for the first time, it will be paired with the device and connected automatically as long as Bluetooth is activated on the mobile phone. As long as there is a device connected via Bluetooth, it will be hidden for the rest of the devices.
To turn off the induction piece, Press and hold the button until the blue LED flashes three times.
Remember it is It is essential that the induction piece is between your neck and your chest, under your clothes, so that the spy headset receives the sound by induction.
Step 2 - Earpiece Type
This model can be purchased only with the Nano Earpiece or also with a Vip Pro type Earpiece. The Nano Penguin offers little volume and can only be used in noise-free environments like exams or libraries. The Spy Earpiece Vip Pro offers more volume and can be used in environments with or without noise.
Select the earpiece model to see the configuration steps
Step 3 - Using the Kit with Vip Pro Earpiece
Step 3.1 - Stack Introduction
Unscrew the black cover of the spy headset and insert the battery with the positive pole up (where are the letters of the brand and the model of the battery is the positive pole).
Next, screw the cap back on, making sure it is screwed on tightly.
La battery begins to discharge as soon as it is inserted on the spy headset and must be removed if not in use to prevent discharge.
The battery model required for the vip pro spy headset is 337-SR416SW.
Step 3.2 - Cleaning and Testing
This sound similar to an untuned radio is normal in all Vip Pro Earpieces. It is due to the constant amplification of the inductive waves emitted by the inductive element. This sound decreases when something is played and when the battery power decreases. Thanks to this technology, we have great autonomy and very small headphones.
Firstly, clean the ear well with a Q-tip, ear cleaning spray or water and dry well. Next, clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear anything.
Hold the spy headset close to your ear and check that you hear a sound similar to that of an untuned radio.
This sound indicates that it is turned on and works properly.
⚠️ If the sound is very loud and can be heard without the earpiece in your ear, unscrew the cover and check that the battery is oriented with the positive pole facing up, then carefully screw the cover back on. If the cover or the battery are not aligned, this noise will occur.
⚠️ If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive pole + facing up and carefully screw the cover back on. If you have left the battery inserted for a long time, it will be discharged and you will need to use the other battery included in the kit or a new one.
Step 3.3 - Introduction and Placement
Insert the earpiece into the left ear. You can also insert it on the right, but generally we hear better on the left. You can push the earpiece with your finger. It is not recommended to insert it too much, as it is not necessary to hide it.
Place the vip pro earpiece nearby of the inducing element like in the image. Now we are going to perform a functional test:
- Put the whole kit on a table.
- Place the vip pro earpiece near the inductor element like in the image.
- Turn on and connect via Bluetooth your mobile to the inducing piece.
- Play a song on your mobile and, while it's ringing, turn the volume up to maximum on your mobile.
If we have heard the song, the induction element has been properly switched on and is working.
Check if you can hear it in the spy earpiece.
Then Place the kit on your body as in the image. The inducing element should always be between the neck and chest (the closer the more volume) to transmit the sound to the handset.
⚠ If the sound is too loud or if you don't hear anything, see the common problems at the bottom of this page. Also remember that you can contact us via chat for help.
You are now done configuring the earpiece VIP Pro. You can follow with instructions in:
Step 4 - Using the Nano Earpiece Kit
If the vip pro earpiece works, the nano earpiece will work for sure. This is because the Nano earpiece works because of the material it's made of. It's recommended to try the VIP Pro earpiece first if you purchased a kit with a VIP Pro earpiece.
Step 4.1 - Kit Parts
The penguins (in the image indicated by the number 3) are the two smallest pieces and should part with the nailYou can find them in the Kit in a plastic bag.
Also included are the extractor bar (2 in the picture) and the puller magnet (1 in the image).
Step 4.2 - Test Function
Place together the Extractor Magnet and the two earpieces and place them in contact with the inductor element like in the image. The extractor magnet, being also made of a piezoelectric material, reacts to inductive waves just like the earpieces, vibrating and causing sound, which is why we will use it together with the earpieces to perform the test:
- Put the whole kit on a table.
- Place the extractor magnet and the two pins in contact with the inductor element like in the image.
- Turn on and connect via Bluetooth your mobile to the inducing piece.
- Play a song on your mobile and, while it's ringing, turn the volume up to maximum on your mobile.
If we have heard the song, the induction element has been turned on correctly and is working.
Then Place the kit on your body as in the image. The inducing element should always be between the neck and chest (the closer the more volume) to transmit the sound to the handset.
⚠ If the sound is too loud or if you don't hear anything, see the common problems at the bottom of this page. Also remember that you can contact us via chat for help.
Step 4.3 - Introduction to the Nano Earpiece
This step It is the most complex and may require several attempts to achieve the correct entry.. Si DO NOT enter it correctly you will hear low or no sound.
For correct insertion, keep your ear clean. It is recommended to use cotton swabs or cleaning spray before of inserting the earpiece.
Enter first a penguin (only one of the two that appear in the image indicated by a 3) in the left ear (we hear better through the left ear than through the right) through the following procedure:
- Turn your head 90º so that the left ear where we are going to insert the earpiece is facing upwards.
- Then drop the earpiece into your ear (You should never try to insert the earpiece with a cotton swab or similar, as it will not be inserted correctly).
- keeping the same position with your head turned, shake your head and make circular movements until you notice the sensation of a drop of water falling into the ear and/or the clogged ear.
⚠️ It may be necessary to repeat this step several times ⚠️
➕ For check that the earpiece has been correctly inserted, put your hand to your ear (so that the earpiece does not fall to the ground) and turn your head to the opposite side. If the earpiece comes out of your ear easily when turning the head is that it has NOT been entered correctly. You must repeat the introduction steps.
➕ You can also check if it is correctly inserted by verifying that another person does not see the earpiece in the ear. If you can see it, DO NOT it is well introduced.
🔧 Tip: There are times when The earpiece just needs a little push to be correctly entered. If so, place the extractor magnet behind your ear, close to the neck. You will notice how the earpiece moves and you can finish placing it.
🔧 Tip 2: There are certain people who accumulate more amount of earwax, especially in the inner part of the ear, causing more difficult to introduce the earpiece. Remember clean the ear and Cleaning Sprays and sticks for the ears. Usually you will only need practice more to enter it correctly. If you can't enter it It is advisable that you have one done ear cleaning to remove wax.
⚠️ If you are unable to enter it, please contact us for assistance: WhatsApp +34 644 098 320 o Email.
Step 4.4 - Placement and Volume
4
When the earpiece has been correctly inserted in the left ear, place the Kit as it appears in the image, remembering that the inductor element should always be on the neck under clothing so that the earpiece receives the sound.
Play a song on your mobile/MP3 and, while it's ringing, turn the volume up to maximum on your mobile. Check if you can hear it in the spy earpiece.
If you hear very low, Also insert the other earpiece into the right ear.
(A single earpiece in the left ear is recommended, since when trying to insert one in each ear, the first one will be misplaced when introducing the second one). (It is VERY likely that if we do not hear well with an earpiece in the left ear, it is because we have not inserted the earpiece correctly, the inductor part does not have enough charge or the inductor element is not in the neck).
Step 5 - Microphone and Volume
The Inducing Piece includes a integrated microphone that should not be covered with skin.
To increase the volume the earpiece should be placed with the inductor element closest to the earpiece.
To decrease volume the inductor element should be placed further away from the earpiece.
Step 6 - Earpiece, Battery and Battery Removal
Remember to turn off the inductor piece while not in use and while it is charging.
Battery charge
La autonomy of the Inductor Piece device is approximately 4 hours.
To load it:
- Turn off the piece by holding the button for 4 seconds until the blue LED flashes 3 times.
- Plug it into power with the charging cable and plug from the Kit or to a charger up to 5V and 1A.
The estimated time of charge is 1-1,5 hours. The device is Charging while the red light is on y fully charged when the red light turns off. Remember to check that the induction piece is turned off while charging.
El neckloop battery percentage It can be consulted when we connect it to the mobile via bluetooth. Depending on the mobile will appear in the upper right corner of the screen or in Settings>Bluetooth.
Earpiece Removal
Step 6.1 - Nano Earpiece Removal
remove the earpiece approaching the extractor bar (indicated in the image with a 2) with puller magnet (indicated with a 1) at its base to the ear as you can see in the first image.
Another VERY effective extraction method es hold with one finger the puller magnet inside the ear and shake your head while keeping it rotated as in the second image. It can be hard to remove the first few times, but after several attempts it will succeed.
Also the earpiece may have already been removed and fallen to the ground, check if it is still in your ear by connecting the Kit and checking if you hear when playing a recording at maximum volume.
⚠️ If you are unable to extract it, please contact us for help: WhatsApp +34 644 098 320 o Email.
It is recommended to clean the earpiece with water or alcohol, the extractor magnet and the extractor bar before and after each use.
Lastly, remember to turn off the collar inductor to prevent it from discharging.
Step 6.2 - Removing the Vip Pro Earpiece
Remove the earpiece by pulling the transparent thread with your fingers.
If you don't get it, you can try to pull the transparent thread with tweezers.
Lastly, remember to disconnect the battery when you finish using the spy earpiece to avoid discharging it.
Thanks for your purchase!
We thank you for your trust in our products. If you experience any inconvenience during use, please do not hesitate to contact us.or feel free to contact us. In most cases, The incidents are due to incorrect use and not a manufacturing defect., so we will be happy to help you resolve it quickly and efficiently.
Videotutorial
Frequent Problems
1 - Bluetooth device not listed
To put the bluetooth piece in pairing mode must Press the button and DO NOT RELEASE IT until the blue light flashes. Connect your mobile Turn on Bluetooth and search for the “V8” device. Once connect your mobile for the first time will be linked to the device and it will connect automatically as long as Bluetooth is turned on on your mobile. If it doesn't turn on, you should charge it..
2 - The calls are not heard but the songs or recordings are heard
If you can listen to recordings or songs through the spy earpiece, but not phone calls, check:
- If you use iPhone, during a phone call, click the speaker or bluetooth icon to activate the output through the bluetooth device.
- If you are using another mobile phone, Also check that Bluetooth audio output is activated while you are on a call. This is usually a Bluetooth or speaker icon.
- Check the settings when making the call.
⚠ If it doesn't work, try another mobile phone.
3 - Doesn't work
Nano earpieces work because of the material they are made of, a piezoelectric material, and not due to any internal electronics in the earpieces. For this reason it is impossible for nano earpieces not to work and the The problem will be the inducing element or the mobile. Follow the steps and tests indicated in the next section (4 – I can't hear anything or very low).
Si the vip pro earpiece does not work follow the checks below:
Clean the earphone holes with a fine needle and be very careful to remove earwax that obstructs the earpiece and can make you not hear anything.
Check that the battery is charged. If it has been left on the spy headset for a long time, it will download and you must use a new battery. The battery discharges even when not in use.
Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where the letters of the brand and the battery model are the positive pole).
Screw the cap back on, making sure it is screwed tightly.
If you hear the sound similar to an untuned radio by putting the earpiece in your ear with the battery inserted, the earpiece is working and the problem will be another. Follow the steps indicated in the next section (3 – I can't hear anything or very low).
⚠️ The battery starts to run out as soon as it is inserted in the earpiece and must be removed if it is not going to be used to avoid its discharge.
3 - I can't hear anything or very low
This is one of the most common problems in the nano earpieces. exist several possible reasons for which you hear nothing or very little. We are going to carry out a series of tests:
With which of the two earpieces are you experiencing the problem?
Spy Earpiece Nano
If the vip pro earpiece works, the nano earpiece will work for sure. This is because the Nano earpiece works because of the material it's made of. It's recommended to try the VIP Pro earpiece first if you purchased a kit with a VIP Pro earpiece.
The penguins (in the image indicated by the number 3) are the two smallest pieces and should part with the nailYou can find them in the Kit in a plastic bag.
Also included are the extractor bar (2 in the picture) and the puller magnet (1 in the image).
Place together the Extractor Magnet and the two earpieces and place them in contact with the inductor element like in the image. The extractor magnet, being also made of a piezoelectric material, reacts to inductive waves just like the earpieces, vibrating and causing sound, which is why we will use it together with the earpieces to perform the test:
- Put the whole kit on a table.
- Place the extractor magnet and the two pins in contact with the inductor element like in the image.
- Turn on and connect via Bluetooth your mobile to the inducing piece.
- Play a song on your mobile and, while it's ringing, turn the volume up to maximum on your mobile.
Si vibrate and/or is heard, the kit It's working correctly.
If in the previous step when carrying out the test you have noticed how the extractor magnet together with the earpieces vibrate or sound, the kit is working correctly and the problem is:
- El inductor element has no charge or has low charge.
- El inductor element was not in the neck while being tested with the earpiece in the ear.
- El volume on his mobile was not maximum.
- The earpiece has not been correctly inserted. (The MOST likely option). Follow the earpiece input steps again:
Enter first a penguin (only one of the two that appear in the image indicated by a 3) in the left ear (we hear better through the left ear than through the right) through the following procedure:
- Turn your head 90º so that the left ear where we are going to insert the earpiece is facing upwards.
- Then drop the earpiece into your ear (You should never try to insert the earpiece with a cotton swab or similar, as it will not be inserted correctly).
- keeping the same position with your head turned, shake your head and make circular movements until you notice the sensation of a drop of water falling into the ear and/or the clogged ear.
⚠️ It may be necessary to repeat this step several times ⚠️
➕ For check that the earpiece has been correctly inserted, put your hand to your ear (so that the earpiece does not fall to the ground) and turn your head to the opposite side. If the earpiece comes out of your ear easily when turning the head is that it has NOT been entered correctly. You must repeat the introduction steps.
➕ You can also check if it is correctly inserted by verifying that another person does not see the earpiece in the ear. If you can see it, DO NOT it is well introduced.
🔧 Tip: There are times when The earpiece just needs a little push to be correctly entered. If so, place the extractor magnet behind your ear, close to the neck. You will notice how the earpiece moves and you can finish placing it.
🔧 Tip 2: There are certain people who accumulate more amount of earwax, especially in the inner part of the ear, causing more difficult to introduce the earpiece. Remember clean the ear and Cleaning Sprays and sticks for the ears. Usually you will only need practice more to enter it correctly. If you can't enter it It is advisable that you have one done ear cleaning to remove wax.
⚠️ If you are unable to enter it, please contact us for assistance: WhatsApp +34 644 098 320 o Email.
When the earpiece has been correctly inserted in the left ear, place the Kit as it appears in the image, remembering that the inductor element should always be on the neck under clothing so that the earpiece receives the sound.
Play a song on your mobile/MP3 and, while it's ringing, turn the volume up to maximum on your mobile. Check if you can hear it in the spy earpiece.
If you hear very low, Also insert the other earpiece into the right ear.
(A single earpiece in the left ear is recommended, since when trying to insert one in each ear, the first one will be misplaced when introducing the second one). (It is VERY likely that if we do not hear well with an earpiece in the left ear, it is because we have not inserted the earpiece correctly, the inductor part does not have enough charge or the inductor element is not in the neck).
Spy Earpiece Vip Pro
Clean the earphone holes with a fine needle and be very careful to remove earwax that obstructs the earpiece and can make you not hear anything.
Check that the battery is charged. If it has been left on the spy headset for a long time, it will download and you must use a new battery. The battery discharges even when not in use.
Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where the letters of the brand and the battery model are the positive pole).
Screw the cap back on, making sure it is screwed tightly.
If you hear a sound similar to that of an untuned radio When you put the spy earpiece in your ear with the battery inserted, the spy headset is working and the problem is another.
Place the inductor element on the neck and the earpiece on the ear and make a phone call. If you cannot establish the call, check step 1 of common problems.
⚠ The battery begins to be consumed from the moment it is inserted in the earpiece and must be removed if not in use.
4 - I only hear out of one ear / earpiece
If the vip pro earpiece works, the nano earpiece will work for sure. This is because the Nano earpiece works because of the material it's made of. It's recommended to try the VIP Pro earpiece first if you purchased a kit with a VIP Pro earpiece.
In nano earpieces this failure is impossible. If one device works, the other works too. This is because the earpieces work because of the material they are made of, a piezoelectric material, and not due to any internal electronics in the earpieces. The material reacts to the inductive waves of the induction collar by vibrating and making sound.
Most likely, the earpiece has not been correctly inserted into the ear, we are confusing the extractor magnet with the earpieces or two earpieces together or that let's hear more through one ear (We normally hear more through the left ear).
If the volume obtained by the earpiece in one ear is sufficient, it is recommended to use it with a single earpiece and save the other.
5 - A very loud sound sounds, like a bee
Untuned radio-like sound is normal in all Vip Pro spy headphones. It is due to the constant amplification of the inductive waves emitted by the collar.
If the sound is very loud, and You can hear it even when it's not in your ear, follow the steps below:
If the sound is very loud, and You can hear it even when it's not in your ear, follow the steps below:
If the sound is very loud and can be heard even with the earphone out of the ear, unscrew the cap and Check that the battery is oriented with the positive + pole facing up and that the cap is screwed on correctly and aligned. If the problem persists, remove the cover again and Gently pull the spring inside the earphone with your fingernail or tweezers. Thus, will be deformed and contact will be made correctly. Can be necesario perform this adjustment occasionally or on first use.
6 - The microphone does not work
The built-in microphone works like a handsfree for phone calls. It is recommended check that it has not been clogged with clothing and try to do the call in speakerphone mode with another mobile and at maximum volume to hear louder.
7 - I can't extract the earpiece
With which of the two earpieces are you experiencing the problem?
Spy Earpiece Nano
You may have to try several times until it is successfully removed.
remove the earpiece approaching the extractor bar (indicated in the image with a 2) with puller magnet (indicated with a 1) at its base to the ear as you can see in the first image.
Another VERY effective extraction method es hold with one finger the puller magnet inside the ear and shake your head while keeping it rotated as in the second image. It can be hard to remove the first few times, but after several attempts it will succeed.
Also the earpiece may have already been removed and fallen to the ground, check if it is still in your ear by connecting the Kit and checking if you hear when playing a recording at maximum volume.
⚠️ If you are unable to extract it, please contact us for help: WhatsApp +34 644 098 320 o Email.
It is recommended to clean the earpiece with water or alcohol, the extractor magnet and the extractor bar before and after each use.
Lastly, remember to turn off the element inductor to prevent it from discharging.
Spy Earpiece Vip Pro
Remove the earpiece by pulling the transparent thread with your fingers.
If you don't get it, you can try to pull the transparent thread with tweezers.
Lastly, remember to disconnect the battery when you finish using the spy earpiece to avoid discharging it.
8 - The Inducer Piece has stopped working
Most likely, has stayed on and the battery has been depleted. Perform a full charge.
If you have already verified that you have a charge follow the steps indicated in the section 3 – I don't hear anything or very low of frequent problems.
⚠️ If the Kit doesn't work, please contact us for help: WhatsApp +34 644 098 320 o Email.
Security and Compliance
⚠ FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER DAMAGE OR INJURY.
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product.
WARNING
Do not use or store the product near other electronic equipment, as the magnetic field from adjacent electrical equipment will seriously damage or interfere with the product. Do not use this product if you have hearing problems, or if you use a hearing aid, pacemaker, or other electronic medical device.
® PingaOculto. All rights reserved.
Product specifications:
Model Name: Nano Earpiece Bluetooth Inductor
Model number: N-27/N-28/N-29
Product identifier: B09W1PHSHW / B09Y4SQTD4 / B09W1QKS6K
Product battery: Integrated Lithium-Ion type with 500 mAh capacity
Electrical Rating: Power: 100-240V 50/60Hz 0.15A
Batteries Included: 2 x Silver Oxide Batteries type 337-SR416SW
Operating temperature: 0 to 35ºC
Product Use
Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for the device and adapter to dry completely before plugging them back in. Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or hairdryer. If the device or adapter is damaged, discontinue use immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or any cables connected to it during a lightning storm. Cables and/or adapters are intended for indoor use only.
Legal Notice
PINGOC NOW SL is not responsible for fraudulent or misuse of the product due to a failure to understand or read the instructions and precautions. This product is not a toy and should not be used in a manner contrary to applicable laws. If you have any questions, please contact us.
For EU customers
Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radiofrequency Exposure Compliance
As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly
Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional safety and compliance information
For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.
Limited Warranty
All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/.
If you need to contact us due to an error, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.
