Spy Cameras
Full HD Spy Camera Charger Instructions
Thank you for choosing our product. If you need assistance or have any questions, please don't hesitate to contact us. We'll be happy to help.
Description

The Full HD Spy Camera Charger is a hidden surveillance solution that looks like a real charger, ideal for discreet recording in homes, offices, or private spaces. It records Full HD 1080P video continuously or by motion detection, even in low light. It runs on AC power, allowing 24/7 recording without the need for batteries.
Available in versions with microSD or Wi-Fi for remote control from your mobile phone. In addition to recording, it charges devices and transmits data via its USB port. Discreet, functional, and easy to use: it starts recording automatically when plugged in.
Features
Functional wall charger type design: realistic appearance that allows it to be discreetly integrated into any environment without raising suspicion.
Recording in Full HD 1080P quality: Capture high-definition video, even in low-light conditions.
24/7 operation connected to the power supply: continuous recording without the need for a battery, ideal for permanent surveillance.
Connectivity options: Available in a version with local recording on microSD or with real-time remote control via WiFi.
Automatic recording when plugged in: : without prior configuration, starts recording immediately when the device is connected.
Motion detection: Activates recording only when it detects activity, optimizing storage.
Functional USB interface: Allows you to charge other devices simultaneously and perform high-speed data transfer.
Storage Compatible with microSD cards (not included), ideal for extended recordings.
Content
1 – Full HD Spy Camera Charger
2 – Instruction Manual
Instructions
Step 0 - Model Selection
Click on the image corresponding to the model purchased to access the instructions
Charger Spy Camera Full HD Without Wifi
Step 1 - Initial Preparation
- Insert a TF (microSD) memory card into the camera before use.
- Use only original high-speed cards, class 10 or higher.
- Format the card on your PC before first use.
Step 2 - Setting the date and time
- Insert a microSD card in the chamber and turn it on by connecting it to the charger.
- Wait a few seconds for the camera to automatically generate the file time.txt in the card.
- Turn off the camera and disconnect it from the charger, then remove the microSD.
- Insert the card into a card reader connected to the computer.
- A file called will appear time.txt on the removable disk.
- Open the file and edit the date and time in the following format:
- Continuous recording mode: 20150101000000 YBs
- Motion detection mode: 20150101000000 Y
- Continuous recording mode: 20150101000000 YBs
- Save the file and reinsert the card into the camera.
- Connect the camera to power to update the timestamp.
Step 3 - Operating Modes
A. Continuous recording mode
- Connect the camera to the power supply.
- The device will automatically start recording after 5 seconds (the red and blue LEDs turn off).
- The video is saved in 3-minute files.
B. Motion detection mode
- Activate this mode by modifying the file time.txt as indicated above (YA).
- Connect the camera to power. After 5 seconds, the LEDs will turn off.
- The camera will only start recording when it detects motion (indicated by a brief blue flash).
- The video is also divided into 3-minute clips.
Step 4 - Restart the camera
- If the camera is not working properly:
- Insert a paper clip or pin into the reset hole and press once.
- The camera will automatically power off and restart.
- Turn it back on.
- Insert a paper clip or pin into the reset hole and press once.
Note: Do not insert the clip into any other hole.
Step 5 - Play the videos
- Remove the memory card from the camera.
- Connect it to your computer using a card reader.
- A removable disk will appear on your computer.
- Open the folder to view the recorded videos (AVI format).
- Recommended player: VLC Media Player (https://www.videolan.org/vlc)
Charger Spy Camera Full HD Wifi
Step 1 - Initial Requirements
- 2.4 GHz Wi-Fi network (not compatible with 5 GHz).
- Network name and password must contain only letters and numbers.
- Compatible device: Android smartphone (version 6.0 or higher) or iOS (version 8.0 or higher).
Step 2 - Download the App
Search and download the app LookCamPro from Google Play (Android) or App Store (iOS).
Step 3 - Camera Setup
Mode 1 – Initial Connection (IP Mode)
- Connect the camera charger to a power outlet and connect to the Wi-Fi network created by the TUT-... camera.
- Open the LookCamPro app
- Press the gear wheel
- Click on Wifi Settings
- Enter your 2.4G home network password and confirm.
- The camera will reboot. Wait 2 to 5 minutes. When it appears as "online," it's ready to use.
Note: If your Android phone displays a warning that the Wi-Fi network doesn't have internet access, ignore it.
Mode 2 – Add Device Online
- If the camera is already connected to your network, select Mode 2 in the app to add it as an online device.
Mode 3 – Direct Connection (AP Mode)
- Allows you to connect the camera directly to your phone without the need for Wi-Fi.
- The phone must be within 10 meters to view the live video.
- This way does not allow remote viewing, direct connection only.
Charger Spy Camera Full HD Wifi Square/Rectangular/Mini
Step 1 - Power On and Restart
- Push the button ON / OFF to turn the camera on or off.
- To reset and restore factory settings, press and hold the Reset button for 5 seconds until the lights turn off. The camera will automatically reboot (this takes about 30 seconds).
Step 2 - LED Indicators
- Red light: Power indicator. Stays lit while the camera is charging.
- Blue light: WiFi indicator.
- slow flashing: Point-to-point (AP) mode.
- Rapid blinking: Connecting to WiFi network.
- Steady on: : WiFi connection established successfully.
- slow flashing: Point-to-point (AP) mode.
If you are not sure of the current mode, press the reset button to return to AP mode.
Step 3 - Installing the Application
Search and download the app "LOOKCAM" from Google Play or App Store.
Step 4 - Connecting to the camera in AP (point-to-point) mode
- Activate your mobile’s WiFi.
- Find your device’s Wi-Fi network (starts with “F+numbers”) and connect.
- Open the app LookCam.
- View live video from the device list.
Step 5 - Switch to WiFi mode (remote control)
- From the app, go to Device Settings (gear) → WiFi Setting
- Select your local WiFi network and enter the password.
- press AcceptThe device will reboot automatically (about 40 seconds).
- Once rebooted, the camera will connect to the internet and you will be able to access it remotely.
Important: The initial password is 123456For added safety, it is recommended to change it after first use.
Thanks for your purchase!
We thank you for your trust in our products. If you experience any inconvenience during use, please do not hesitate to contact us.or feel free to contact us. In most cases, The incidents are due to incorrect use and not a manufacturing defect., so we will be happy to help you resolve it quickly and efficiently.
Frequent Problems
What to do if the camera is not responding?
Perform a camera reset by inserting a paper clip or pin into the reset hole.
Why can't I connect to the camera?
- Check that the router is working properly and that the network is 2.4G (not compatible with 5G)
- Make sure the password is correct.
- If you forgot your password, reset the camera to factory settings.
Why is remote streaming slow or choppy?
Adjust the resolution based on your internet connection speed. Lowering the resolution on slower connections improves fluidity.
Why aren't videos recorded on the SD card?
Make sure to use a Class 10 microSD card and format it before first use. Wait up to 3 minutes after inserting the card for the camera to recognize it.
I forgot my password, what do I do?
Hold the button Reset for 5 seconds to reset to factory settings. The default password is 123456.
Security and Compliance
⚠ FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER DAMAGE OR INJURY.
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product.
WARNING
Do not use or store the product near other electronic equipment, as the magnetic field from adjacent electrical equipment will seriously damage or interfere with the product. Do not use this product if you have hearing problems, or if you use a hearing aid, pacemaker, or other electronic medical device.

® PingaOculto.
All rights reserved.
Product specifications:
Model Name: Full HD Spy Camera Charger
Model number: M3B/CW3/Z99/Z99-1/Z99-2
Product ID: 8445678901231 / 8456781234564 / 8467890123451 / 8476543210986 / 8487654321093
Electrical Rating: 320 mAh Lithium Battery
Operating temperature: 0 to 40ºC
Product Use
Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for the device and adapter to dry completely before plugging them back in. Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or hairdryer. If the device or adapter is damaged, discontinue use immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or any cables connected to it during a lightning storm. Cables and/or adapters are intended for indoor use only.
Legal Notice
PINGOC NOW SL is not responsible for fraudulent or misuse of the product due to a failure to understand or read the instructions and precautions. This product is not a toy and should not be used in a manner contrary to applicable laws. If you have any questions, please contact us.
For EU customers
Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radiofrequency Exposure Compliance
As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly
Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional safety and compliance information
For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.
Limited Warranty
All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/.
If you need to contact us due to an error, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.