4G Portable Wifi Router Instructions 📋

🇪🇸 - Select your language

- Select your language

- Wähle deine Sprache

???????? - Choose your language

🇵🇹 – Select your language

🇳🇱 – Selecteer je taal

- Välj ditt språk

- Wybierz swój język

What is a 4G Portable Wifi Router?

A 3 Mbps 4G/150G LTE Portable Wifi router allows the simultaneous internet connection of up to 10 devices such as tablets, mobiles, spy cameras or computers, among others. Ideal for travelers, students and professionals on the go what do you need stay connected anytime, anywhere. Create a 2.4GHz Wi-Fi network anywhere introducing a SIM card with mobile data and connection to 3G or 4G LTE with this compact and easy to transport device of only 9,7cm x 5,9cm x 1,5cm y 150 grams of weight. La 3000mAh rechargeable battery allow up to 8 hours of use at top speed and up to 90 hours in standby mode.

Is it compatible with all networks?

This portable wifi router works inserting a MicroSIM card. Through the mobile data internet from our operator It provides connection to the devices that connect. In each country uses certain bands for the connection according to the frequency. You may consult the bands used in your country by pressing here.

Our compatible bands of the device are:

4G/FDD:B1/B3/B5/B7/B8/B20/B28*
4G TDD:B38/39/40/41
3G WCDMA:B1/B5/B8

Technical characteristics

The portable wifi router has a super small size and a weight of only 150 grams to facilitate its transport.

Simultaneous connection of up to 10 devices such as tablets, cell phones, spy cameras or computers, among others

Internet connection using mobile data by entering a Micro SIM card . Includes adapters for NanoSIM cards.

Our compatible bands del dispositivo son: 4G/FDD:B1/B3/B5/B7/B8/B20/B28* | 4G TDD:B38/39/40/41 | 3G WCDMA:B1/B5/B8

The built-in rechargeable 3000 mAh battery allows up to 8 hours of use at maximum speed and up to 90 hours in standby mode

Kit Contents

1 – Portable Wifi Router

2 – 3000 mAh battery

3 – NanoSIM-MicroSIM adapter

4 – TypeC-USB Charging Cable

Instructions

Step 0 - Loading the Router

El router can be charged with the included MicroUSB-USB charging cable connected to un 2.0A max charger. while this charging battery icon will flash y when it is fixed the battery will be fully charged.

Step 1 - Opening the lid

La cover of the portable wifi router can be opened with a fingernail on the side tab.

Step 2 - Battery Saver

La battery includes a plastic protector that must be removed in order to use the product.

Step 3 - Remove SIM PIN Code

To use the SIM card with the Router it is need to temporarily remove the SIM pin code. You can find the setting on your mobile in security, privacy or similar settings. If you don't find the option, search in google: "remove sim card pin code + mobile model/brand".

Step 4 - Insert SIM Card

Enter the Micro SIM card as it appears in the image checking the orientation.

Can use the included NanoSIM to MicroSIM adapter checking that it is entered correctly. PTo facilitate its introduction, you can put double-sided adhesive tape so that the card is glued to the adapter.

Step 5 - Wifi Network Name and Password

El wifi network name and password can be found on the sticker behind the battery.

By default it will be:

Wi-Fi network name: 4G-MIFI-****
Password: 12345678 mm

Step 6 - Power on

To turn on the wifi router we must press and hold the power button for 3 seconds.

Wait a few seconds to the screen turns on.

Step 7 - Status Lights

After approx. one minute It will connect to the network and display the following information:

Signal Level and Connection Type
Battery Percentage
Wifi On/Off and Connected Devices
Mobile operator
Number of unread SMS

Below the previous icons appears the Wi-Fi network name, password and mobile data consumed.

Si the operator does not appear or “NO SIM” appears, we have to verify that we have removed the PIN from the MicroSIM, the orientation of the MicroSIM card inserted, that there is coverage and that we have mobile data enabled in our operator. Also, check compatible bands.

Step 8 - Query and Change Parameters

From a device connected to Wi-Fi We can consult all the parameters and change the configuration by entering the url from a browser: 192.168.1.1 and entering: admin in username and password.

We can modify the name of the wifi network and its password in Router>User Management.

Step 8.1 - Hide Wifi Router

Remember first configure the devices that you will use with the router like your mobile, computer or spy camera.

- Remove SIM PIN on a mobile and activate the card verifying that you receive calls and have mobile data

- turn on the router holding the button down for 3 seconds (remember to remove the battery sticker from the router)

- connect to router on a mobile or computer and put url in browser: 192.168.1.1

- In username and password, put: admin and access

– In the top menu, access “wireless" and later "Wireless Security Settings"

– Change the option of “Network Visibility Status” to Invisible

– Finally, click on “Save”In the lower right corner

Step 9 - Reset

To reset the wifi router we must open the lid and while it is on hold the reset button until the lights go out.

After wait 30 seconds about to factory reset.

If you have questions, don't hesitate to contact us! 😉

Frequent Problems

1 - Does not turn on

The router shipped lightly charged. Can be charged with the included MicroUSB-USB charging cable connected to un 2.0A max charger. while this charging battery icon will have lightning bolt icon y when the battery is removed it will be fully charged.

2 - No Signal

Review the following steps:

La MicroSIM card orientation is correct (Step 3 in the instructions)
You have mobile data on your line.
Ha removed sim pin.
There are coverage in the area.
El router is loaded.
Our compatible bands of the product match those of your country:

Our compatible bands of the device are:

4G/FDD:B1/B3/B5/B7/B8/B20/B28*
4G TDD:B38/39/40/41
3G WCDMA:B1/B5/B8

3 - Forgot password/Doesn't work

If you have forgotten the password or it doesn't work because the router parameters are wrong, you should reset it:

To reset the wifi router we must open the lid and while it is on hold the reset button until the lights go out.

It must also check that the plastic has been removed from the battery.

If you have questions, don't hesitate to contact us! 😉

Security and Compliance

Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:

🇪🇸 - Select your language

- Select your language

- Wähle deine Sprache

???????? - Choose your language

🇵🇹 – Select your language

🇳🇱 – Selecteer je taal

- Välj ditt språk

- Wybierz swój język

⚠ FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER DAMAGE OR INJURY.

⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.

Commercial Company: PingOc Now SL

Address: Calle Lucio del Valle 12, Local 1, 28003, Madrid, Spain.

Product specifications:

Model Name: 4G Portable Wifi Router

Model Number: H809pro-EU

Product identifier: 706212918436

Product battery: Integrated Lithium-Ion type with 2100 mAh capacity

Operating temperature: 0 to 50ºC

Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.

Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.

For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in compliance with Directive 2014/53/UE.

Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.

How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.

Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.

Limited Warranty: All official PingaOculto brand items have a 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.

Find Out More

Do you want to contact us?

follow us on