Vip Pro MegaMini GSM Instructions

Table of Contents

1 Vip Pro MegaMini GSM Instructions

What is a Vip Pro MegaMini GSM Pinganillo?

A Vip Pro MegaMini earpiece is a auricular cordless with reduced size of only 1,2×0,68cm which is inserted into the ear, remaining hidden. This type of hidden headphones are usually used for cheating in exams, use in presentations, espionage…The Vip Pro MegaMini Pinganillo is the only one that does not require a nearby inductor element, having a operation very undetectable.

How does the Vip Pro MegaMini GSM Earpiece Work?

The Vip Pro MegaMini GSM earpiece works wirelessly with an inductor into which we will insert the SIM card and must be less than 10 meters from the handset. Thanks to induction technology we can use hidden earpieces with a very small size and without cables.

Is the Vip Pro MegaMini GSM Earpiece Safe?

Yes, the Vip Pro MegaMini earpiece has the size suitable for insertion into the ear and includes a transparent string for removal with fingers or a tweezer. This penguin not waterproof and should be cleaned with the battery removed using a dry cloth or a damp cloth with alcohol so as not to damage it.

Technical characteristics

The Vip Pro MegaMini earpiece is a conical-shaped headset with a reduced size of 1,2×0,68cm. Remains totally hidden being invisible from the outside.

The Vip Pro MegaMini earpiece requires a battery for operation. Two are included with the kit.

The connection between the handset and the telephone call is made through GSM connection. The distance between the inductor and the earpiece may be Up to 10 meters.

The autonomy of the earpiece is approximately 4 hours depending on volume. The battery must be disconnected from the earpiece when not in use.

Kit Contents

1 – Vip Pro MegaMini earpiece

2 – GSM inductor

4 – 2 SR421SW Batteries

5 – USB charging cable

Instructions

Step 0 - Original Product PingaOculto

Check that it is a original product of PingaOculto checking that the brand that appears on the product is the same.

If you have doubts about whether it is original, you can contact us and we will verify it. Contact us through: WhatsApp +34 644 098 320 o Email.

Step 1 - Stack Introduction

Unscrew the black cover of the handset and Insert the battery with the positive side facing up (where are the letters of the brand and the model of the battery is the positive pole).

Then screw the cap back on, making sure it is screwed in tightly.

La battery begins to discharge as soon as it is inserted on the spy headset and must be removed if not in use to prevent discharge.

The battery model required by the handset is SR421SW.

Step 2 - Operation Check

This sound similar to an untuned radio is normal in all Vip Pro Earpieces. It is due to the constant amplification of the inductive waves emitted by the inductive element. This sound decreases when something is played and when the battery power decreases. Thanks to this technology, we have great autonomy and very small headphones.

Firstly, clean the ear well with a Q-tip, ear cleaning spray or water and dry well. Next, clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear anything.

Hold the spy headset close to your ear and check that you hear a sound similar to that of an untuned radio.

This sound indicates that it is turned on and works properly.

If the sound is very loud and can be heard without the earpiece in your ear, unscrew the cap and check that the battery is oriented with the positive pole + facing up and screw the cap back on carefully. If the lid or the battery are not aligned it will make this noise.

If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive + side facing up and screw the cap back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.

Step 3 - Introducing the Earpiece

ATTENTION - To remove the Vip Pro MegaMini earpiece from your ear, you need the transparent thread.

You should NEVER insert the earpiece if it is damaged or has been cut.

Insert the earpiece into the left ear. You can also insert it on the right, but generally we hear better on the left. You can push the earpiece with your finger. It is not recommended to insert it too much, as it is not necessary to hide it.

Step 4 - Remove SIM PIN Code

To use the SIM card with the Kit it is need to temporarily remove the SIM pin code. You can find the setting on your mobile in security, privacy or similar settings.

If you don't find the option, search on google: “remove sim card pin code + mobile model/brand”.

Step 5 - Introduction Nano SIM Card

Open the GSM inductor compartment inserting the nail into the side to remove the top cover and access the Nano SIM card tray located under the button.

Slide the Nano SIM card tray in the direction «OPEN» and lift the tray. Then insert the Nano SIM card according to the blunt corner orientation.

Finally, close the tray, slide in the direction «LOCK» and close the GSM inductor cover by pressing and doing match the microphone hole of the GSM inductor with that of the cover.

Step 6 - Power and Functions

Turn on the GSM inductor by holding the center button. The Blue LED will light up (if it doesn't turn on, charge it with the included cable for at least 1 hour) and you will hear on the earpiece «Power On» and some indications about the battery level of the GSM inductor and the volume of the handset.

The multifunction button allows you to perform the following functions:

Press 1 time - Hook off the call or indicate the level of battery of the GSM inductor between high, medium or low levels.
Press 2 times in a row - Change the costumes of the handset between high, medium or low levels.
Press 3 times in a row - Linkage between the GSM inductor and the handset. When the headset is turned on, a short beep will be heard for 10 seconds if the pairing is correct and if it is incorrect we will hear a long beep.
Hold down - Off on and whitelist function. The White list allows you to define a phone number from which calls will be answered automatically. If no number is defined, all calls will be automatically picked up. To activate this function While receiving the phone call, you must press and hold the button for >3 seconds. Next, the inducer will restart and the whitelist will be defined for the phone number from which we were receiving the call. To eliminate it we must repeat the process.

At turn off GSM inductor Remember to hold down the center button while there is no call in progress or it will restart.

Step 7 - Function Test

Place the kit at a distance of less than 10 meters so that the spy earpiece receives the sound.

Call from a mobile phone to the SIM card and will be answered automatically.

If the sound is too loud or you can't hear anything, see the common problems at the bottom of this page. Also remember that you can contact us via chat for help.

Step 8 - Microphone and Volume

El Integrated microphone is located in the GSM inductor.

The volume is controlled by pressing the button twice between high, medium or low.

Do not set the volume too high on the headset or it will be heard outside your ear.

Step 9 - Earpiece Removal, Battery and Shutdown

Remember to turn off the GSM inductor while not in use and while charging

The battery life of the GSM inductor piece is approximately 4 hours.

To charge it, connect it to the electrical network with the charging cable included in the kit and in a charger up to 5V and 1A and a Red LED will light when plugged in. The device It will be fully charged when the red light goes off.

Remove the spy earpiece by pulling the transparent thread with your fingers. If you don't succeed, you can try tremove the transparent thread with tweezers.

Lastly, remember to disconnect the battery when you finish using the spy headset to prevent it from discharging. As long as the battery is inside, it will continue to consume.

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Frequent Problems

the penguins can be complex products when putting them into operation. Check below the Vip Pro MegaMini GSM handset frequent problems.

1 - Does not establish the call with the GSM Inductor

It can be due to several reasons. Perform the following checks:

Check that the Nano SIM card does not have a PIN. You can check it by entering it in your mobile and restarting the mobile. If it asks for the SIM pin at power-up, you should remove it. To use the SIM card with the Kit it is need to temporarily remove the SIM pin code. You can find the setting on your mobile in security, privacy or similar settings. If you don't find the option, search on Google: “remove SIM card pin code + mobile model/brand”.

Verify that it has battery and has been charged off.

Verify that you have inserted the Nano SIM card correctly and heard it click when entering it.
Verify that the Nano SIM card can make or receive calls.
Verify that the GSM Card compatible GSM bands which are: 850 / 900 / 1800 / 1900 are available in your country in: https://www.worldtimezone.com/gsm.html
Test in the open to rule out a coverage problem. Besides, try another Nano SIM card from another operator. For example, in Spain, the most recommended operators are Movistar or Vodafone and the least recommended is Orange and similar.

The GSM Inductor receives less signal than a mobile phone. It is important to try an operator with good coverage.

2 - Doesn't work

Clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear.
Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you must use another new battery. The battery discharges even if the handset is not in use.
Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole).
Screw the cap back on checking let it remain correctly screwed.

If you hear a sound similar to that of a tuned radio when you put the spy earphone on your ear with the battery inserted, the spy headset is working and the problem is another.

Place the inductor within 10 meters of the earphone and the spy earpiece in your ear. Next, make the call to the SIM card. If it does not work, reset GSM inductor.

If you still can't get it to work, contact us via chat.

3 - I can't hear anything or very low

This is one of the most common problems in the penguins exist several possible reasons for which you hear nothing or very little. We are going to carry out a series of tests:

Clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear.
Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you must use another new battery. The battery discharges even if the handset is not in use.
Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole).
Screw the cap back on checking let it remain correctly screwed.

If you hear a sound similar to that of a tuned radio when you put the spy earphone on your ear with the battery inserted, the spy headset is working and the problem is another.

Place the inductor within 10 meters of the earphone and the spy earpiece in your ear. Next, make the call to the SIM card. If it does not work, reset GSM inductor.

If you still can't get it to work, contact us via chat.

4 - The sound is too loud or too quiet

Do not set the volume too high on the headset or it will be heard outside your ear.

The volume is controlled by pressing the button twice between high, medium or low.

5 - I hear a Sound like a Bee

Untuned radio-like sound is normal in all Vip Pro spy headphones. It is due to the constant amplification of the inductive waves emitted by the inductive element.
If the sound is very loud, and You can hear it even when it's not in your ear, follow the steps below:

If the sound is very loud and can be heard even with the earphone out of the ear, unscrew the cap and Check that the battery is oriented with the positive + pole facing up and that the cap is screwed on correctly and aligned. If the problem persists, remove the cover again and Gently pull the spring inside the earphone with your fingernail or tweezers. Thus, will be deformed and contact will be made correctly. Can be necesario perform this adjustment occasionally or on first use.

6 - The microphone does not work

If the problem occurs with the microphone, check:

The inducing piece has been restarted.
Check the call volume of the mobile phone with which we have contacted.
Try another mobile phone or tablet.

7 - I can't extract the earpiece

Remove the earpiece pulling the transparent thread with your fingers. If it is not possible, you can try pull the transparent thread with some tweezers. Is It is advisable that another person remove it by us, since you will be able to see the thread better to pull it with the tweezers.

Lastly, remember to disconnect the battery when you are done before using the device to prevent it from discharging.

8 - The Earpiece has stopped working

Check that the battery is charged. If it has been left on the spy headset Even if you are not using it, it will be downloaded and you will need to use a new battery.
Check that earwax does not clog the speaker of the spy earpiece. If it is, clean it carefully with a needle or pin. Can be necessary to perform this step every few uses.
Si hear a sound similar to that of an untuned radio When you put the spy earphone in your ear with the battery inserted, the spy earphone is working and the problem is something else. Follow the steps for common problems (3 – I can't hear anything or very low).

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Security and Compliance

Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:

⚠ FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER DAMAGE OR INJURY.

⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.

Product specifications:

Model Name: Vip Pro MegaMini GSM

Model Number: VP-23

Product identifier: 706212918408

Product battery: Integrated Lithium-Ion type with 500 mAh capacity

Battery Included: 2 x SR421SW Batteries

Operating temperature: 0 to 35ºC

Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.

Legal notice: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.

For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.

Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.

How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.

Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.

Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.

Find Out More

Do you want to contact us?

follow us on