Vip Pro Jack Necklace Instructions

Table of Contents

1 Vip Pro Jack Necklace Instructions

What is a Vip Pro Pinganillo?

A vip pro earpiece is a auricular small size wireless which is inserted into the ear, remaining hidden. This type of hidden headphones are usually used for cheating in exams, use in presentations, espionage...

How does the Vip Pro Pinganillo Work?

The Vip Pro Pinganillo works using technology electromagnetic induction. The inductive collar generates an inductive wave that is amplified by the earpiece and converted into sound. Thanks to induction technology we can use Hidden earpieces with a very small size, great autonomy and resistant to inhibitors.

Is the Vip Pro Pinganillo Safe?

Yes, the Pinganillo Vip Pro has the size suitable for insertion into the ear and includes a transparent thread for its extraction with the fingers or with a tweezers in case it has been very inserted. This penguin not waterproof and should be cleaned with the battery removed using a fine needle for the holes and a dry cloth or a damp cloth with alcohol so as not to damage it.

Technical characteristics

The Vip Pro Jack collar is very easy to hide under clothing thanks to its thin 1mm wire.

The inducing collar emits inductive waves his amplified by the earpiece transforming them into sound.

The connection between the induction collar and the mobile phone is made through the 3.5mm jack connector. If you use a mobile phone without this connector, you can use a adapter.

The Vip Pro earpiece requires a battery for its funtionability. Two are included with the kit and you can purchase more on our website or at watch stores.

The Vip Pro Jack collar does not require charging and the Vip Pro earpiece requires a 337 battery with a autonomy of up to 4 hours.

Kit Contents

1 – Vip Pro Induction Necklace

2 – Vip Pro Mini, SuperMini or UltraMini earpiece

3 – 2 Batteries 337/SR416SW

+ Wired Microphone

4 – Jack adapter

5 – Microphone by Jack Cable

Instructions

Step 0 - Original Product PingaOculto

Check that it is a original product of PingaOculto checking that the brand that appears on the product is the same.

If you have doubts about whether it is original, you can contact us and we will verify it. Contact us through: WhatsApp +34 644 098 320 o Email.

Step 1 - Stack Introduction

Unscrew the black cover of the handset and Insert the battery with the positive side facing up (where are the letters of the brand and the model of the battery is the positive pole).

Then screw the cap back on, making sure it is screwed in tightly.

La battery begins to discharge as soon as it is inserted on the spy headset and must be removed if not in use to prevent discharge.

The battery model required by the handset is 337-SR416SW.

Step 2 - Cleaning and Function Check

This sound similar to an untuned radio is normal in all Vip Pro Earpieces. It is due to the constant amplification of the inductive waves emitted by the inductive element. This sound decreases when something is played and when the battery power decreases. Thanks to this technology, we have great autonomy and very small headphones.

Firstly, clean the ear well with a Q-tip, ear cleaning spray or water and dry well. Next, clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear anything.

Hold the spy headset close to your ear and check that you hear a sound similar to that of an untuned radio.

This sound indicates that it is turned on and works properly.

If the sound is very loud and can be heard without having the earpiece in your ear, unscrew the cover and check that the battery is oriented with the positive + pole facing up and carefully screw the cover back on. If the cover or battery is not aligned it will make this noise. If you are still experiencing this problem and the sound is similar to that of a bee check step 4 of common problems.

If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive + side facing up and screw the cap back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.

Step 3 - Introducing the Earpiece

Insert the earpiece into the left ear. You can also insert it on the right, but generally we hear better on the left. You can push the earpiece with your finger. It is not recommended to insert it too much, as it is not necessary to hide it.

Step 4 - Mobile/MP3 Connection

Connect the mobile phone to the induction collar and put the kit on the body as shown in the picture. Electromagnetic induction is short-range, so it must be on the neck.

If you have purchased The kit with the wired microphone, plug the collar into the green connector and the microphone into the red connector. Follow the following checks:

Remove the case from your mobile phone as it may prevent a proper connection.
If your phone requires an adapter, check that it works with other headphones to rule out a problem with the headset and check that it is original.
Check that the connectors are fully inserted (have to apply some force).

Remember that It is essential that the induction collar is on your neck, under the clothes, so that the earpiece receives the sound by induction.

It has been detected that some iPhone models have a compatibility problem when using the device with non-original adapters when making a phone call. You need to use an original adapter or use another mobile phone.

Step 5 - Function Test

Play a song on your mobile/MP3 and, while it's ringing, turn the volume up to maximum on your mobile. Check if you can hear it on the spy headset. Remember that the induction collar must be on the neck.

If the sound is too loud or you can't hear anything, see the common problems at the bottom of this page. Also remember that you can contact us via chat for help.

Step 6 - Multifunction Button, Microphone and Volume

The inductor collar button It will not work if the red/green connector is used. this button there's no need, being able reply the call From the phone.

You can use this kit to phone calls or recordings. The integrated microphone is located behind the push button. These buttons and microphone will only work if you are NOT using the red/green adapter or wired microphone.

The central button between the + and – button allows:

1 Click: Answer call or Pause/Play recordings.
2 Clicks: Next recording.
3 Clicks. Previous recording.

The + and – buttons allow you to adjust the volume, or You can control it directly from your mobile.

Recommended search the app store from our mobile one compatible application with these functions to use the kit to play songs or recordings. For iPhone it is recommended: https://apps.apple.com/es/app/grabadora-de-voz/id685310398

⚠ Some functions may not be available on some mobiles, especially iPhones and mobile models that require an adapter to connect to the induction collar. Try another mobile or control the call/recording directly from the mobile.

Step 7 - Earpiece Removal and Battery Disconnect

Remove the earpiece by pulling the transparent thread with your fingers. If you don't make it, you can try pulling of the transparent thread with a tweezer.

Lastly, remember to disconnect the battery when you finish using the device to prevent it from downloading.

⚠ If you can't extract it, contact us to help you: WhatsApp +34 644 098 320 o Email.

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Frequent Problems

the penguins can be complex products when putting them into operation. Check below the common problems with the vip pro jack collar.

1 - The calls are not heard but the songs or recordings are heard

Si manages to hear the recordings or songs through the earpiece, but not the phone calls, check:

If you are using iPhone, The adapter used to connect the inductor collar is original.
If you are using another mobile, Check that the adapter is original or of good quality.
Check that the inducer collar is on the green connector and the microphone is on the red connector and that they are connected correctly (apply some force).
check if it works connecting the inductor collar directly to the mobile, without red/green adapter. It works, check that you are entering the microphone in the red connector and the collar in the green.
Try another mobile and check that the settings when making the phone call on your mobile are correct.

⚠ If it doesn't work, try another mobile. If you need more help contact us: WhatsApp +34 644 098 320 o Email.

2 - Doesn't work

Clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear.
Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you must use another new battery. The battery discharges even if the handset is not in use.
check if it works connecting the inductor collar directly to the mobile, without red/green adapter. It works, check that you are entering the microphone in the red connector and the collar in the green.
Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole).
Screw the cap back on checking let it remain correctly screwed.

If you hear a sound similar to that of a tuned radio when you put the spy earphone on your ear with the battery inserted, the spy headset is working and the problem is another.

Put the necklace around your neck and the spy earpiece in the ear and Make sure it is properly connected to your mobile phone (see first issue in common issues), then, play a song at maximum volume and remove silent mode of your mobile phone. If it does not work, try restarting the phone and cleaning the connection port.

If you still can't hear the song, check again placing the headset near the collar y Try another mobile phone, computer or tablet. Also try another battery.

If you still can't get it to work, contact us via chat.

3 - I can't hear anything or very low

This is one of the most common problems in the penguins exist several possible reasons for which you hear nothing or very little. We are going to carry out a series of tests:

Clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear.
Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you must use another new battery. The battery discharges even if the handset is not in use.
check if it works connecting the inductor collar directly to the mobile, without red/green adapter. It works, check that you are entering the microphone in the red connector and the collar in the green.
Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole).
Screw the cap back on checking let it remain correctly screwed.

If you hear a sound similar to that of a tuned radio when you put the spy earphone on your ear with the battery inserted, the spy headset is working and the problem is another.

If you still can't hear the song, check again placing the headset near the collar y Try another mobile phone, computer or tablet. Also try another battery.

If you still can't get it to work, contact us via chat.

4 - A very loud sound sounds, like a bee

Untuned radio-like sound is normal in all Vip Pro spy headphones. It is due to the constant amplification of the inductive waves emitted by the collar.
If the sound is very loud, and You can hear it even when it's not in your ear, follow the steps below:

If the sound is very loud and can be heard even with the earphone out of the ear, unscrew the cap and Check that the battery is oriented with the positive + pole facing up and that the cap is screwed on correctly and aligned. If the problem persists, remove the cover again and Gently pull the spring inside the earphone with your fingernail or tweezers. Thus, will be deformed and contact will be made correctly. Can be necesario perform this adjustment occasionally or on first use.

5 - The button does not work or does not work as it should

The inductor collar button It will not work if the red/green connector is used. this button there's no need, being able reply the call From the phone.

⚠ Some functions may not be available on some mobiles, especially iPhones and mobile models that require an adapter to connect to the inducer collar. Try another mobile or control the call/recording directly from the mobile.

The central button between the + and – button allows:

1 Click: Answer call or Pause/Play recordings.
2 Clicks: Next recording.
3 Clicks. Previous recording.

The + and – buttons allow you to adjust the volume, or You can control it directly from your mobile.

6 - The microphone does not work

The collar's built-in microphone or wired microphone may do not work on mobile phones with a non-original adapter, as is often the case with iPhones, for example. It is recommended to purchase an original adapter or use another mobile phone.

If the problem occurs with the wired microphone, check:

The microphone is connected to the red connector and has been pressed firmly to connect it.
The phone has been restarted and a original adapter to have a jack port.
In the Official Mobile Voice Recorder or Memos application, the microphone does pick up sound.
In a phone call, the microphone picks up the sound.
Try another phone or tablet.

7 - I can't extract the earpiece

Remove the earpiece pulling the transparent thread with your fingers. If it is not possible, you can try pull the transparent thread with some tweezers. Is It is advisable that another person remove it by us, since you will be able to see the thread better to pull it with the tweezers.

Lastly, remember to disconnect the battery when you are done before using the device to prevent it from discharging.

8 - The Earpiece has stopped working

Check that the battery is charged. If it has been left on the spy headset Even if you are not using it, it will be downloaded and you will need to use a new battery.
Check that earwax does not clog the speaker of the spy earpiece. If it is, clean it carefully with a needle or pin. Can be necessary to perform this step every few uses.
Si hear a sound similar to that of an untuned radio When you put the spy earphone in your ear with the battery inserted, the spy earphone is working and the problem is something else. Follow the steps for common problems (3 – I can't hear anything or very low).

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Security and Compliance

Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:

⚠ FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER DAMAGE OR INJURY.

⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.

Product specifications:

Model Name: Vip Pro Jack Inductor Collar

Model Number: VP-02

Product identifier: B08J8FQLBV

Batteries Included: 2 x Silver Oxide Batteries type 337-SR416SW

Operating temperature: 0 to 35ºC

Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.

Legal notice: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.

For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.

Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.

How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.

Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.

Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.

Find Out More

Do you want to contact us?

follow us on