Vip Pro Bluetooth Necklace Instructions
Table of Contents
- 1 Vip Pro Bluetooth Necklace Instructions
- 1.1 What is a Vip Pro Pinganillo?
- 1.2 How does the Vip Pro Pinganillo Work?
- 1.3 Is the Vip Pro Pinganillo Safe?
- 1.4 Technical characteristics
- 1.5 Kit Contents
- 1.6 Instructions
- 1.6.1 Step 0 - Original Product PingaOculto
- 1.6.2 Step 1 - Stack Introduction
- 1.6.3 Step 2 - Cleaning and Function Check
- 1.6.4 Step 3 - Introducing the Earpiece
- 1.6.5 Step 4 - Power On and Bluetooth Connection
- 1.6.6 Step 5 - Function Test
- 1.6.7 Step 6 - Multifunction Button, Microphone and Volume
- 1.6.8 Step 7 - Earpiece Removal, Battery, Battery Disconnect and Power Off
- 1.7 Frequent Problems
- 1.7.1 1 - Bluetooth device not listed
- 1.7.2 2 - The calls are not heard but the songs or recordings are heard
- 1.7.3 3 - Doesn't work
- 1.7.4 4 - I can't hear anything or very low
- 1.7.5 5 - A very loud sound sounds, like a bee
- 1.7.6 6 - The button does not work or does not work as it should
- 1.7.7 7 - The microphone does not work
- 1.7.8 8 - I can't extract the earpiece
- 1.7.9 9 - The Earpiece has stopped working
- 1.8 Security and Compliance
What is a Vip Pro Pinganillo?
How does the Vip Pro Pinganillo Work?
Is the Vip Pro Pinganillo Safe?
Technical characteristics
- 1mm wire
- Operation by Electromagnetic Induction
- Bluetooth connection 4.0
- Integrated Battery
- Requires 1 Battery 337-SR416SW
- Autonomy of 4 hours
The autonomy of the Vip Pro Bluetooth collar is approximately 4 hours and the Vip Pro handset requires a 337 battery with a autonomy of up to 4 hours.
Kit Contents
1 – Vip Pro Bluetooth Inductor Collar with Integrated Microphone/Cable*
2 – Vip Pro SuperMini / UltraMini earpiece
3 – 2 Batteries 337/SR416SW
4 – MicroUSB Charging Cable
*Depending on purchased product
Instructions
Step 0 - Original Product PingaOculto
Check that it is a original product of PingaOculto checking that the brand that appears on the product is the same.
If you have doubts about whether it is original, you can contact us and we will verify it. Contact us through: WhatsApp +34 644 098 320 o Email.
Step 1 - Stack Introduction
Unscrew the black cover of the handset and Insert the battery with the positive side facing up (where are the letters of the brand and the model of the battery is the positive pole).
Then screw the cap back on, making sure it is screwed in tightly.
La battery begins to discharge as soon as it is inserted on the spy headset and must be removed if not in use to prevent discharge.
The battery model required by the handset is 337-SR416SW.
Step 2 - Cleaning and Function Check
Firstly, clean the ear well with a Q-tip, ear cleaning spray or water and dry well. Next, clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear anything.
Hold the spy headset close to your ear and check that you hear a sound similar to that of an untuned radio.
This sound indicates that it is turned on and works properly.
If the sound is very loud and can be heard without having the earpiece in your ear, unscrew the cover and check that the battery is oriented with the positive + pole facing up and carefully screw the cover back on. If the cover or battery is not aligned it will make this noise. If you are still experiencing this problem and the sound is similar to that of a bee check step 4 of common problems.
If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive + side facing up and screw the cap back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.
Step 3 - Introducing the Earpiece
Insert the earpiece into the left ear. You can also insert it on the right, but generally we hear better on the left. You can push the earpiece with your finger. It is not recommended to insert it too much, as it is not necessary to hide it.
Step 4 - Power On and Bluetooth Connection
Turn on the neckloop VIP Pro Bluetooth holding down the center button for at least 6 secondsuntil the lights LEDs flash red/blue (if it doesn't turn on, charge it with the included cable and charger for at least 1 hour). Then access the bluetooth settings on your mobile and connect to a device called «GB-T01».
Once you connect your mobile for the first time will be linked to the device and it will connect automatically as long as Bluetooth is turned on on your mobile. As long as there is a device connected via Bluetooth, it will be hidden for the rest of the devices.
To turn off the inducer collar, Long press the button until the red light flashes twice.
Remember that It is essential that the induction collar is on your neck, under the clothes, so that the earpiece receives the sound.
Step 5 - Function Test
Play a song on your mobile/MP3 and, while it's ringing, turn the volume up to maximum on your mobile. Check if you can hear it on the spy headset. Remember that the inducer collar must be on the neck.
⚠ If the sound is too loud or if you don't hear anything, see the common problems at the bottom of this page. Also remember that you can contact us via chat for help.
Step 6 - Multifunction Button, Microphone and Volume
You can use this kit to phone calls or recordings. The Integrated microphone is located on the top rear and, in the version with a wired microphone, like a very thin cable.
The center button allows:
- 1 Click: Answer call or pause/play recordings.
The volume is controlled directly from the mobile phone.
⚠ Some features may not be available on some phones, especially iPhones. Try another mobile phone, app or control the call/recording directly from the mobile phone.
Step 7 - Earpiece Removal, Battery, Battery Disconnect and Power Off
El neckloop battery percentage It can be consulted when we connect it to the mobile via bluetooth. Depending on the mobile will appear in the upper right corner of the screen or in Settings>Bluetooth.
The battery life of the Inductor Vip Pro Bluetooth collar is approximately 4 hours.
To charge it, connect it to the electrical network with the charging cable included in the kit and a charger up to 5V and 1A. A red light will turn on when plugged in. Estimated charging time is 1 hour. The device will be fully charged when the red light turns blue.
Remove the spy earpiece by pulling the transparent thread with your fingers. If you don't get it, you can try to pull the transparent thread with tweezers.
Lastly, Remember to disconnect the battery when you finish using the spy headset to prevent it from being discharged..
Frequent Problems
the penguins can be complex products when putting them into operation. Check below the common vip pro b collar problemsluetooth.
1 - Bluetooth device not listed
To put the vip pro bluetooth collar in pairing mode must Press the button and DO NOT RELEASE until the lights flash Red and Blue. If you release it before (when the first blue lights appear) it will not go into pairing mode and it will not appear in bluetooth on your mobile. Connect your mobile turning on Bluetooth and search for the device “GB-T01”. Once connect your mobile for the first time will be linked to the device and it will connect automatically as long as Bluetooth is turned on on your mobile. If it doesn't turn on, you should charge it..
2 - The calls are not heard but the songs or recordings are heard
If you can listen to recordings or songs through the spy earpiece, but not phone calls, check:
- If you use iPhone, during a phone call, click the speaker or bluetooth icon to activate the output through the bluetooth device.
- If you are using another mobile phone, Also check that Bluetooth audio output is activated while you are on a call. This is usually a Bluetooth or speaker icon.
- Check the settings when making the call.
⚠ If it doesn't work, try another mobile phone.
3 - Doesn't work
- Clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear.
- Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you must use another new battery. The battery discharges even if the handset is not in use.
- Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole).
- Screw the cap back on checking let it remain correctly screwed.
If you hear a sound similar to that of a tuned radio when you put the spy earphone on your ear with the battery inserted, the spy headset is working and the problem is another.
Put the necklace around your neck and the spy earpiece in the ear and Make sure it is properly connected to your mobile phone (see first issue in common issues), then, play a song at maximum volume and remove silent mode of your mobile phone. If it does not work, try restarting the phone.
If you still can't hear the song, check again placing the headset near the collar y Try another mobile phone, computer or tablet. Also try another battery in the handset..
If you still can't get it to work, contact us via chat.
4 - I can't hear anything or very low
- Clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear.
- Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you must use another new battery. The battery discharges even if the handset is not in use.
- Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole).
- Screw the cap back on checking let it remain correctly screwed.
If you hear a sound similar to that of a tuned radio when you put the spy earphone on your ear with the battery inserted, the spy headset is working and the problem is another.
Put the necklace around your neck and the spy earpiece in the ear and Make sure it is properly connected to your mobile phone (see first issue in common issues), then, play a song at maximum volume and remove silent mode of your mobile phone. If it does not work, try restarting the phone.
If you still can't hear the song, check again placing the headset near the collar y Try another mobile phone, computer or tablet. Also try another battery in the handset..
If you still can't get it to work, contact us via chat.
5 - A very loud sound sounds, like a bee
If the sound is very loud, and You can hear it even when it's not in your ear, follow the steps below:
If the sound is very loud and can be heard even with the earphone out of the ear, unscrew the cap and Check that the battery is oriented with the positive + pole facing up and that the cap is screwed on correctly and aligned. If the problem persists, remove the cover again and Gently pull the spring inside the earphone with your fingernail or tweezers. Thus, will be deformed and contact will be made correctly. Can be necesario perform this adjustment occasionally or on first use.
6 - The button does not work or does not work as it should
Some features may not be available on some phones, especially iPhone. Try another mobile phone, app or control the call/recording directly from the mobile phone.
The center button allows:
- 1 Click: Answer call or Pause/Play recordings.
7 - The microphone does not work
If the problem occurs with the integrated or wired microphone, check:
- El phone has been restarted.
- In the Official Mobile Voice Recorder or Memos application, the microphone does pick up sound.
- In a phone call, the microphone picks up the sound.
- Check the Bluetooth device settings on the mobile phone.
- Try another phone or tablet.
8 - I can't extract the earpiece
Remove the earpiece pulling the transparent thread with your fingers. If it is not possible, you can try pull the transparent thread with some tweezers. Is It is advisable that another person remove it by us, since you will be able to see the thread better to pull it with the tweezers.
Lastly, remember to disconnect the battery when you are done before using the device to prevent it from discharging.
9 - The Earpiece has stopped working
- Check that the battery is charged. If it has been left on the spy headset Even if you are not using it, it will be downloaded and you will need to use a new battery.
- Check that earwax does not clog the speaker of the spy earpiece. If it is, clean it carefully with a needle or pin. Can be necessary to perform this step every few uses.
- Si hear a sound similar to that of an untuned radio When you put the spy earphone in your ear with the battery inserted, the spy earphone is working and the problem is something else. Follow the steps for common problems (3 – I can't hear anything or very low).
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.
® PingaOculto. All rights reserved.
Product specifications:
Model Name: Vip Pro Bluetooth Necklace
Model Number: VP-05
Product identifier: B09VZPKW2F
Product battery: Integrated Lithium-Ion type with 300 mAh capacity
Batteries Included: 2 x Silver Oxide Batteries type 337-SR416SW
Operating temperature: 0 to 35ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Legal notice: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.