Nano V8 Earpiece Instructions

Table of Contents

1 Nano V8 Earpiece Instructions

What is a Nano Earpiece?

A nano earpiece is a auricular very small wireless which is inserted into the ear, remaining completely hidden. This type of hidden headphones are usually used for cheating in exams, use in presentations, espionage… The Nano Earpiece is the most popular model and one of the best sellers, but its operation can be complex without a guide.

How does the Nano Earpiece Work?

nano earpieces work using technology electromagnetic induction. The inductor collar generates an inductive wave that will cause a vibration in the earpieces, resulting in the sound. Thanks to induction technology we can use stealth earpieces like the nano, the size of a lentil and resistant to inhibitors.

Is the Nano Earpiece Safe?

Yes, the penguins do not have any internal electrical circuitry nor anything similar. They work because they are made of a piezoelectric material. who reacts to electromagnetic induction emitted by the induction collar vibrating and resulting in sound. Not having any electrical circuit, the earpiece can be cleaned with water for better hygiene.

You can find more information in the section on security and compliance of the product located at the end of the web.

Technical characteristics

The nano earpiece is the smallest headset on the market with a size similar to that of a lentil. Is left over totally hidden being invisible from the outside.

The Nano V8 induction collar integrates a rechargeable battery inside. This battery can be charged at 100% in approximately 1 hour.

The inducing collar emits inductive waves causing the nano earpiece to vibrate and generating sound. The nano earpiece no charging required.

The connection between the induction collar and the mobile phone is made by bluetooth connection. The distance between the mobile phone and the induction collar may be Up to 10 meters.

The autonomy of the collar is approximately 3 hours depending on volume. The induction collar must be turned off when not in use and while charging.

Kit Contents

1 – Nano V8 Inductor Collar

2 – 6 Round Nano Earpieces

3 – USB charging cable

4 – Extractor Bar

Instructions

This penguin model It has a complex operation and is It is very important that you follow the steps indicated in the instructions.

Step 0 - Original Product PingaOculto

Check that it is a original product of PingaOculto checking that the brand that appears on the cards included with the product is the same as the one in the image.

If you have doubts about whether the product is original, you can contact us by attaching an image and we will verify it. Contact us via: WhatsApp +34 644 098 320 o email.

Step 1 - Kit Parts

Extractor Bar and Earpieces

The penguins (6 round earpieces) are the two smallest pieces and should part with the nail. You can find them in the Kit in a bag. Also included are extractor bar to extract them.

Step 2 - Power On and Bluetooth Connection

The choke collar is shipped with little or no charge, It is recommended to charge it before its first use. (See Step 7)

To put the Nano V8 device in pairing mode must press button A until the blue light comes on. Connect your mobile turning on the Bluetooth and search for the device “GLmoyin”. Once connect your mobile for the first time will be linked to the device and it will connect automatically as long as Bluetooth is turned on on your mobile.

For turn off the Nano V8 press and hold the A button until the blue light flashes 3 times.

Step 3 - Test Function

Place together the penguins and place them in contact with the inductor collar, which must be rolled as in the picture.

Play a song on your mobile and while playing turn up the volume to the maximum from your mobile. Bring your ear close to the earpieces that are in contact with the induction collar and check if it is heard or vibrates.

Si vibrate and/or can be heard the kit It's working correctly.

If they do not vibrate or hear anything, repeat the steps with another mobile and verify that the induction collar has a charge, that the cable is coiled as in the image, that you have placed the earpieces close to the cable and that the volume is maximum while playing the song. If you need more help contact us: WhatsApp +34 644 098 320 o email.

Step 4 - Introducing Nano Earpiece

This step It is the most complex and may require several attempts to achieve the correct entry.. Si DO NOT enter it correctly you will hear low or not at all

Recommended For a correct introduction of the earpiece, keep the ear as clean as possible. We recommend using before introducing it swabs and/or spray for ear cleaning

Enter first a penguin (only one of the two 6 included) in the left ear (we hear better through the left ear than through the right) through the following procedure:

Turn your head 90º so that the left ear where we are going to insert the earpiece is facing upwards.
Then drop the earpiece into your ear (You should never try to insert the earpiece with a cotton swab or similar, since it will not be correctly inserted).
keeping the same position with your head turned, shake your head and make circular movements until you notice the sensation of a drop of water falling into the ear and/or the clogged ear.

It may be necessary to spread this step several times

For check that the earpiece has been correctly inserted, put your hand to your ear (so that the earpiece does not fall to the ground) and turn your head to the opposite side. If the earpiece comes out of your ear easily when turning the head is that it has NOT been entered correctly. You must repeat the introduction steps.

also can check if it is correctly inserted by verifying that another person does not see the earpiece in the ear. If you can see it, DO NOT it is well introduced.

Tip: There are times when The earpiece just needs a little push to be correctly entered. If so, place the extractor bar behind your ear, close to the neck. You will notice how the earpiece moves and you can finish placing it.

Tip 2: There are certain people who accumulate more amount of earwax, especially in the inner part of the ear, causing more difficult to introduce the earpiece. Remember clean the ear with Cleaning Sprays and sticks for the ears. Usually you will only need practice more to enter it correctly. If you can't enter it it is recommended that you have a ear cleaning to remove wax plugs.

If you can't enter it, contact us to help you: WhatsApp +34 644 098 320 o email.

Step 5 - Kit Placement and Volume Adjustment

When the earpiece has been correctly inserted in the left ear, place the Kit as it appears in the image, remembering that the induction collar should always be on the neck under clothing so that the earpiece receives the sound.

Play the song, recording or phone call by turning the volume up to the maximum on your mobile to check if the volume it provides is enough a penguin (sufficient in most cases) if we have inserted the earpiece correctly, if the volume is high, the collar has enough charge and is on the neck).

If you hear very low, Also insert the other earpiece into the right ear.

(A single earpiece in the left ear is recommended, since when trying to insert one in each ear, the first one will be misplaced when introducing the second one). (It is VERY likely that if we do not hear well with an earpiece in the left ear it is because we have not inserted the earpiece correctly, the volume is not the maximum in the mobile, the induction collar does not have enough charge or it is not on the neck).

Step 6 - Multifunction, Microphone and Volume Buttons

You can use this Kit by phone call or with recordings. He Integrated microphone is located at the top of the induction collar. The volume is regulated from the mobile.

The button allows:

1 Click: Answer call or Pause/Play recordings.

Some features may not be available on some mobiles. Try another mobile or control the call/recording directly from the mobile.

Step 7 - Removing the Earpiece, Battery and Washing the Earpiece

Remember to turn off the neckloop while not in use and while charging

La autonomy of the Nano V8 device is approximately 3 hours.

to load it remove the inductor collar from the connector y connect it to the current with the cable of the Kit (the connector No. is completely inserted into the port of the Nano V8). will light a Red light when connecting it. The estimated time of charge is 1 hour. The device is fully charged when a green light comes on.

El neckloop battery percentage It can be consulted when we connect it to the mobile via bluetooth. Depending on the mobile will appear in the upper right corner of the screen or in Settings>Bluetooth.

remove the earpiece bringing the extractor bar at its base closer to the ear and shake your head while keeping it rotated like in the picture. It can be hard to remove the first few times, but after several attempts it will succeed.

As well the earpiece may have already been removed and fallen to the ground, check if it is still in your ear by connecting the Kit and checking if you hear when playing a song at maximum volume.

If you cannot extract it, contact us to help you: WhatsApp +34 644 098 320 o email.

It is recommended to clean the earpieces with water or alcohol and the extractor bar before and after each use for hygiene.

Finally, remember to turn off the collar inductor to prevent discharge holding down the A button until the blue light flashes 3 times.

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Frequent Problems

the penguins can be complex products when putting them into operation. Check below the frequent problems penguin nano v8 and its solution.

1 - Bluetooth device not listed

2 - Doesn't work

Nano earpieces work because of the material they are made of, a piezoelectric material, and not due to any internal electronics in the earpieces. For this reason it is impossible for nano earpieces not to work and The problem will be the inductor collar or the mobile. Follow the steps and tests indicated in the next section.

3 - I can't hear anything or very low

This is one of the most common problems in the nano earpieces. exist several possible reasons for which you hear nothing or very little. We are going to carry out a series of tests:

Extractor Bar and Earpieces

The penguins (6 round earpieces) are the two smallest pieces and should part with the nail. You can find them in the Kit in a bag. Also included are extractor bar to extract them.

Check that the Nano V8 Induction Collar is connected to your mobile via Bluetooth.

Place together the penguins and place them in contact with the inductor collar, which must be rolled as in the picture.

Si vibrate and/or can be heard the kit It's working correctly.

If in the previous step when carrying out the test you have noticed how the earpieces vibrate or sound, the kit is working correctly and the problem is:

El inductor collar has no charge or has low charge.
El induction collar was not on the neck while being tested with the earpiece in the ear.
El volume on his mobile was not maximum.
The earpiece has not been correctly inserted. (The MOST likely option). Follow the earpiece input steps again:

Enter first a penguin (only one of the two 6 included) in the left ear (we hear better through the left ear than through the right) through the following procedure:

Turn your head 90º so that the left ear where we are going to insert the earpiece is facing upwards.
Then drop the earpiece into your ear (You should never try to insert the earpiece with a cotton swab or similar, since it will not be correctly inserted).
keeping the same position with your head turned, shake your head and make circular movements until you notice the sensation of a drop of water falling into the ear and/or the clogged ear.

It may be necessary to spread this step several times

also can check if it is correctly inserted by verifying that another person does not see the earpiece in the ear. If you can see it, DO NOT it is well introduced.

If you can't enter it, contact us to help you: WhatsApp +34 644 098 320 o email.

If you hear very low, Also insert the other earpiece into the right ear.

4 - I only hear out of one ear / earpiece

If one earpiece works, the other works too. This is because the earpieces work because of the material they are made of, a piezoelectric material, and not due to any internal electronics in the earpieces. The material reacts to the inductive waves of the induction collar by vibrating and making sound.

Most likely, the earpiece has not been correctly inserted into the earOr this let's hear more for one than for another (normally we hear more through the left ear than through the right).

If the volume obtained by the earpiece in one ear is sufficient, it is recommended to use it with a single earpiece and save the other spare.

5 - The button does not work or does not work as it should

You can use this Kit by phone call or with recordings. He Integrated microphone is located at the top of the induction collar. The button allows:

1 Click: Answer call or Pause/Play recordings.

⚠ Some features may not be available on some mobiles. Try another mobile or control the call/recording directly from the mobile.

6 - The integrated microphone does not work

The built-in microphone works like a handsfree for phone calls, but you can not work on some mobiles. It is recommended Check your mobile settings when making the call or use another mobile.

7 - I can't extract the earpiece

As well the earpiece may have already been removed and fallen to the ground, check if it is still in your ear by connecting the Kit and checking if you hear when playing a song at maximum volume.

If you cannot extract it, contact us to help you: WhatsApp +34 644 098 320 o email.

It is recommended to clean the earpieces with water or alcohol and the extractor bar before and after each use for hygiene.

Finally, remember to turn off the collar inductor to prevent discharge holding down the A button until the blue light flashes 3 times.

8 - The Choke Collar has stopped working

Most likely, has stayed on and the battery has been depleted. Perform a full charge.

If you have already verified that you have a charge follow the steps indicated in section 3 -I can't hear anything or very low of frequent problems.

If the Kit does not work, contact us to help you: WhatsApp +34 644 098 320 o email.

9 - Low Autonomy

🔋❗ The volume to the maximum drastically reduces autonomy. You must adjust the costumes al audible minimum (typically 50-70%) on your mobile.

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Security and Compliance

Below is the important product information in relation to the security and compliance that guarantee proper and safe use of the product:

⚠ FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER DAMAGE OR INJURY.

⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.

Product specifications:

Model Name: Nano V8

Model Number: N-21

Product identifier: B085CG7286

Product battery: Integrated Lithium-Ion type with 500 mAh capacity

Electrical Rating: Power: 100-240V 50/60Hz 0.15A

Operating temperature: 0 to 35ºC

Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.

Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.

For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.

Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.

How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.

Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.

Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.

Find Out More