+34 644 507 888
+34 91 417 04 02
WhatsApp +34 644 507 888
Call + 34 972 25 62 12
🇪🇸 - Select your language
- Select your language
- Wähle deine Sprache
???????? - Choose your language
🇵🇹 – Select your language
🇳🇱 – Selecteer je taal
- Välj ditt språk
- Wybierz swój język
Table of Contents
2 Types of Earpieces
This model includes two models of earpieces, the nano and the vip pro ultramini. Each model best fits one type of situation.
reduced sizes
The nano earpiece is 3mm in size and the ultramini vip pro is 1,08x0,68cm. The two earpieces adapt to the ear, being completely hidden.
Integrated Battery in the Collar
The Nano V8 inductor collar integrates a rechargeable battery inside. This battery can be 100% charged in approximately 1 hour.
Operation by Electromagnetic Induction
The inductive collar emits inductive waves to the earpiece. The nano earpiece does not require charging and the vip pro ultramini requires a battery with 4 hours of autonomy.
Bluetooth connection 4.0
The connection between the inductor collar and the mobile is made through a bluetooth connection. The distance between the mobile and the inductor collar may be up to 10 meters.
Autonomy of 3 hours
The autonomy of the collar is approximately 3 hours depending on the volume. The induction collar must be turned off when not in use and while charging.
1 – Nano V8 Inductor Collar
2 – 6 Round Nano Earpieces
3 – USB charging cable
4 – Extractor Bar
5 – Vip Pro UltraMini earpiece
6 – 2 Batteries 379/SR521SW
7 – Vip Pro UltraMini Earpiece Extractor Bar
Check that it is a original PingaOculto product checking that the brand that appears on the cards included with the product is the same as the one in the image.
If you have doubts about whether the product is original, you can contact us by attaching an image and we will verify it. Contact us via: WhatsApp +34 644 507 888 o Email.
To put the Nano V8 device in pairing mode must press button A until the blue light comes on. Connect your mobile turning on the Bluetooth and search for the device “GLmoyin”. Once connect your mobile for the first time will be linked to the device and it will connect automatically as long as Bluetooth is turned on on your mobile.
To turn off the Nano V8 press and hold the A button until the blue light flashes 3 times.
Two types of earpiece are included in this model, being able to choose the one you prefer according to the situation. The Nano Penguin offers little volume and can only be used in noise-free environments like exams or libraries. The Vip Pro UltraMini Earpiece offers more volume and can be used in environments with or without noise.
Select the earpiece model you prefer to see the configuration steps
Unscrew the black cap from the earpiece and insert the stack with the positive pole facing upwards. Then screw the cap back on checking let it remain correctly screwed.
The battery begins to be consumed from the moment it is inserted on the earpiece and should withdraw if not to be used to avoid downloading. The model of the battery that the earpiece requires is 379-SR521SW.
Bring the earpiece to your ear and check that you can hear a sound similar to an untuned radio. This sound indicates that you are powered on and working properly.
⚠ If the sound is very loud, it can be heard without the earpiece in your ear, unscrew the cap and check that the battery is oriented with the positive pole + facing up and screw the cap back on carefully. If the lid or the battery are not aligned it will make this noise.
⚠ If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive pole + facing up and screw the cover back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.
Place the Kit as it appears in the image remembering that the induction collar should always be on the neck under clothes. The mobile can be up to 8 meters away, but it is recommended to have it close in case it is necessary to use it at any time. Put the earpiece in the ear always with the battery inside.
Play a song on your mobile and while playing turn up the volume to the maximum from your mobile. Check if it is heard on the earpiece.
For more security it is recommended to fix the induction collar with cloth or plastic tape to your skin so that it does not move during use. For repeated use you can even sew it to sweatshirts or jackets. Remember that the Induction Collar is not washable.
⚠ If the song is not heard through the earpiece, but you do hear the sound of the radio without tuning, check that the inductor collar is on the neck and that the mobile is correctly connected and with the volume at maximum. If it doesn't work try another mobile. If you need more help contact us: WhatsApp +34 644 507 888 o Email.
You are now done configuring the earpiece vip pro ultra mini. You can follow with instructions in:
The penguins (6 round earpieces) are the two smallest pieces and should part with the nail. You can find them in the Kit in a bag. Also included are extractor bar to extract them.
Place together the penguins and place them in contact with the inductor collar, which must be rolled as in the picture.
Play a song on your mobile and while playing turn up the volume to the maximum from your mobile. Bring your ear close to the earpieces that are in contact with the induction collar and check if it is heard or vibrates.
Si vibrate and/or can be heard the kit It's working correctly.
If they do not vibrate or hear anything, repeat the steps with another mobile and verify that the induction collar has a charge, that the cable is coiled as in the image, that you have placed the earpieces close to the cable and that the volume is maximum while playing the song. If you need more help contact us: WhatsApp +34 644 507 888 o Email.
Enter first a penguin (only one of the two 6 included) in the left ear (we hear better through the left ear than through the right) through the following procedure:
It may be necessary to spread this step several times
To check that the earpiece has been correctly inserted, put your hand to your ear (so that the earpiece does not fall to the ground) and turn your head to the opposite side. If the earpiece comes out of your ear easily when turning the head is that it has NOT been entered correctly. You must repeat the introduction steps.
also can check if it is correctly inserted by verifying that another person does not see the earpiece in the ear. If you can see it, DO NOT it is well introduced.
Tip: There are times when The earpiece just needs a little push to be correctly entered. If so, place the extractor bar behind your ear, close to the neck. You will notice how the earpiece moves and you can finish placing it.
Tip 2: There are certain people who accumulate more amount of earwax, especially in the inner part of the ear, causing more difficult to introduce the earpiece. Remember clean the ear with Cleaning Sprays and sticks for the ears. Usually you will only need practice more to enter it correctly. If you can't enter it it is recommended that you have a ear cleaning to remove wax plugs.
If you can't enter it, contact us to help you: WhatsApp +34 644 507 888 o Email.
When the earpiece has been correctly inserted in the left ear, place the Kit as it appears in the image, remembering that the induction collar should always be on the neck under clothing so that the earpiece receives the sound.
Play the song, recording or phone call by turning the volume up to the maximum on your mobile to check if the volume it provides is enough a penguin (sufficient in most cases) if we have inserted the earpiece correctly, if the volume is high, the collar has enough charge and is on the neck).
If you hear very low, Also insert the other earpiece into the right ear.
(A single earpiece in the left ear is recommended, since when trying to insert one in each ear, the first one will be misplaced when introducing the second one). (It is VERY likely that if we do not hear well with an earpiece in the left ear it is because we have not inserted the earpiece correctly, the volume is not the maximum in the mobile, the induction collar does not have enough charge or it is not on the neck).
You can use this Kit by phone call or with recordings. He Integrated microphone is located at the top of the induction collar. The volume is regulated from the mobile.
The button allows:
Some features may not be available on some mobiles. Try another mobile or control the call/recording directly from the mobile.
La autonomy of the Nano V8 device is approximately 3 hours.
to load it remove the inductor collar from the connector y connect it to the current with the cable of the Kit (the connector No. is completely inserted into the port of the Nano V8). will light a Red light when connecting it. The estimated time of charge is 1 hour. The device is fully charged when a green light comes on.
El neckloop battery percentage It can be consulted when we connect it to the mobile via bluetooth. Depending on the mobile will appear in the upper right corner of the screen or in Settings>Bluetooth.
remove the earpiece bringing the extractor bar at its base closer to the ear and shake your head while keeping it rotated like in the picture. It can be hard to remove the first few times, but after several attempts it will succeed.
As well the earpiece may have already been removed and fallen to the ground, check if it is still in your ear by connecting the Kit and checking if you hear when playing a song at maximum volume.
If you cannot extract it, contact us to help you: WhatsApp +34 644 507 888 o Email.
It is recommended to clean the earpieces with water or alcohol and the extractor bar before and after each use for hygiene.
Finally, remember to turn off the collar inductor to prevent discharge holding down the A button until the blue light flashes 3 times.
Remove the earpiece by inserting the removal bar into your ear. Remember that this is magnetized to the battery, so You should never insert the earpiece into your ear without first inserting the battery.
Finally, remember to disconnect the battery when you finish using the earpiece so it doesn't download.
⚠ If you can't extract it, contact us to help you: WhatsApp +34 644 507 888 o Email.
If you have questions, don't hesitate to contact us! 😉
the penguins can be complex products when putting them into operation. Check below the Frequent problems with the nano v8 vip pro ultramini earpiece.
To put the Nano V8 device in pairing mode must press button A until the blue light comes on. Connect your mobile turning on the Bluetooth and search for the device “GLmoyin”. Once connect your mobile for the first time will be linked to the device and it will connect automatically as long as Bluetooth is turned on on your mobile. If it doesn't turn on, you should charge it..
Nano earpieces work because of the material they are made of, a piezoelectric material, and not due to any internal electronics in the earpieces. For this reason it is impossible for nano earpieces not to work and The problem will be the inductor collar or the mobile. Follow the steps and tests indicated in the next section (3 – I can't hear anything or very low).
Si vip pro ultramini earpiece does not work follow the checks below:
The battery begins to be consumed from the moment it is inserted in the earpiece and must be removed if it is not going to be used to avoid its discharge. The model of the battery that the earpiece requires is 379-SR521SW.
With which of the two earpieces are you experiencing the problem?
Check that the Nano V8 Induction Collar is connected to your mobile via Bluetooth.
If in the previous step when carrying out the test you have noticed how the earpieces vibrate or sound, the kit is working correctly and the problem is:
If you hear the sound similar to an untuned radio by putting the earpiece in your ear with the battery inserted, the earpiece is working
Place the induction collar on the neck and the earpiece in the ear and checking that it is connected by bluetooth play a song at maximum volume on your mobile.
The battery begins to be consumed from the moment it is inserted in the earpiece and must be removed if it is not going to be used to avoid its discharge. The model of the stack is 379-SR521SW.
If one earpiece works, the other works too. This is because the earpieces work because of the material they are made of, a piezoelectric material, and not due to any internal electronics in the earpieces. The material reacts to the inductive waves of the induction collar by vibrating and making sound.
Most likely, the earpiece has not been correctly inserted into the earOr this let's hear more for one than for another (normally we hear more through the left ear than through the right).
If the volume obtained by the earpiece in one ear is sufficient, it is recommended to use it with a single earpiece and save the other spare.
You can use this Kit by phone call or with recordings. He Integrated microphone is located at the top of the induction collar. The button allows:
⚠ Some features may not be available on some mobiles. Try another mobile or control the call/recording directly from the mobile.
The built-in microphone works like a handsfree for phone calls, but you can not work on some mobiles. It is recommended Check your mobile settings when making the call or use another mobile.
Most likely, has stayed on and the battery has been depleted. Perform a full charge.
If you have already verified that you have a charge follow the steps indicated in section 3 -I can't hear anything or very low of frequent problems.
If the Kit does not work, contact us to help you: WhatsApp +34 644 507 888 o Email.
🔋❗ The volume to the maximum drastically reduces autonomy. You must adjust the costumes al audible minimum (typically 50-70%) on your mobile.
Below is the important product information in relation to the security and compliance that guarantee proper and safe use of the product:
⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.
Commercial Company: PingOc Now SL
® PingaOculto. All rights reserved.
Address: Calle Lucio del Valle 12, Local 1, 28003, Madrid, Spain.
Product specifications:
Model Name: Nano V8 + Vip Pro UltraMini
Model Number: N-23
Product identifier: B08J8GDF3D
Product battery: Integrated Lithium-Ion type with 500 mAh capacity
Electrical Rating: Power: 100-240V 50/60Hz 0.15A
Batteries Included: 2 x Silver Oxide Batteries type 379-SR521SW
Operating temperature: 0 to 35ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Disclaimer: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in compliance with Directive 2014/53/UE.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email pingaoculto@gmail.com, Call/WhatsApp +34 644 507 888.
Limited Warranty: All official PingaOculto brand items have a 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: pingaoculto@gmail.com or by Call/WhatsApp: +34 644 507 888.
Anywhere in the world
Up to 14 calendar days
Quick and Efficient Management
PayPal / MasterCard / Visa