Vip Pro Bluetooth Piece Instructions

What is a Vip Pro Pinganillo?

Vip Pro earpieces
A vip pro earpiece is a auricular small size wireless which is inserted into the ear, remaining hidden. This type of hidden headphones are usually used for cheating in exams, use in presentations, espionage...

How does the Vip Pro Pinganillo Work?

The Vip Pro Pinganillo works using technology electromagnetic induction. The inductor piece generates an inductive wave that is amplified by the earpiece and converted into sound. Thanks to induction technology we can use Hidden earpieces with a very small size, great autonomy and resistant to inhibitors.
Vip Pro Bluetooth Piece Placement
Inductive Waves of the Vip Pro Bluetooth Piece

Is the Vip Pro Pinganillo Safe?

Yes, the Pinganillo Vip Pro has the size suitable for insertion into the ear and includes a transparent thread for its extraction with the fingers or with a tweezers in case it has been very inserted. This penguin not waterproof and should be cleaned with the battery removed using a fine needle for the holes and a dry cloth or a damp cloth with alcohol so as not to damage it.

Technical characteristics

The Vip Pro Bluetooth Piece is very easy to hide under clothing thanks to its reduced size.
The bluetooth piece integrates a rechargeable battery inside. This battery can be charged at 100% in approximately 1 hour.
The Vip Pro earpiece requires a battery for operation. Two are included with the kit and you can purchase more on our website or at watch stores.
The bluetooth piece emits inductive waves his amplified by the earpiece generating sound. The device requires a battery.
The connection between the bluetooth piece and the mobile is made through bluetooth connection. The distance between the mobile phone and the Bluetooth piece may be Up to 10 meters.
The autonomy of the earpiece and the Bluetooth piece is approximately 3 hours depending on volume. The battery must be disconnected from the handset when not in use.

Kit Contents

Content Kit Part Bluetooth Earpiece Vip Pro SuperMini

1 – Bluetooth piece

2 – Vip Pro SuperMini / UltraMini earpiece

3 – 2 Batteries 337/SR416SW

4 – USB charging cable

Instructions

Step 0 - Original Product PingaOculto

PingaOculto

Check that it is a original product of PingaOculto checking that the brand that appears on the product is the same.

If you have doubts about whether it is original, you can contact us and we will verify it. Contact us through: WhatsApp +34 644 098 320 o Email.

Step 1 - Stack Introduction

Step 1 VIP Pro Mini

Unscrew the black cover of the handset and Insert the battery with the positive side facing up (where are the letters of the brand and the model of the battery is the positive pole).

Then screw the cap back on, making sure it is screwed in tightly.

La battery begins to discharge as soon as it is inserted on the spy headset and must be removed if not in use to prevent discharge.

The battery model required by the handset is 337-SR416SW.

Step 2 - Cleaning and Function Check

This sound similar to an untuned radio is normal in all Vip Pro Earpieces. It is due to the constant amplification of the inductive waves emitted by the inductive element. This sound decreases when something is played and when the battery power decreases. Thanks to this technology, we have great autonomy and very small headphones.
Clean Ear and Earpiece
Introduction Vip Pro UltraMini Earpiece

Firstly, clean the ear well with a Q-tip, ear cleaning spray or water and dry well. Next, clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear anything.

Hold the spy headset close to your ear and check that you hear a sound similar to that of an untuned radio.

This sound indicates that it is turned on and works properly.

⚠ If the sound is very loud and can be heard without having the earpiece in your ear, unscrew the cover and check that the battery is oriented with the positive + pole facing up and carefully screw the cover back on. If the cover or battery is not aligned it will make this noise. If you are still experiencing this problem and the sound is similar to that of a bee check step 4 of common problems.

⚠ If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive + side facing up and screw the cap back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.

Step 3 - Introducing the Earpiece

Introduction Vip Pro UltraMini Earpiece

Insert the earpiece into the left ear. You can also insert it on the right, but generally we hear better on the left. You can push the earpiece with your finger. It is not recommended to insert it too much, as it is not necessary to hide it.

Step 4 - Power On and Bluetooth Connection

The bluetooth part is shipped with low or no charge, It is recommended to charge it before its first use. (See Step 7)
Vip Pro Bluetooth On Piece
Vip Pro Bluetooth Piece Placement

Turn on the Vip Pro Bluetooth Induction Piece holding down the button with the nail for at least 6 seconds, until the lights LED flashes red/blue (If it doesn't turn on, charge it with the included cable and charger for at least 1 hour). Next, access the Bluetooth settings of your mobile phone and connect it to a device called «GB-T01«.

Once you connect the mobile phone for the first time, it will be paired with the device and connected automatically as long as Bluetooth is activated on the mobile phone. As long as there is a device connected via Bluetooth, it will be hidden for the rest of the devices.

To turn off the induction piece, Press and hold the button until the red light flashes twice.

Remember it is It is essential that the induction piece is between your neck and your chest, under your clothes, so that the spy headset receives the sound by induction.

Step 5 - Function Test

Mobile Bluetooth Connection Pinganillo

Play a song on your mobile/MP3 and, while it's ringing, turn the volume up to maximum on your mobile. Check if you can hear it on the spy headset. Remember that The inductor piece should be between the neck and chest and close to where the spy headset is.

⚠ If the sound is too loud or if you don't hear anything, see the common problems at the bottom of this page. Also remember that you can contact us via chat for help.

Step 6 - Multifunction Button, Microphone and Volume

Vip Pro Bluetooth Microphone Piece

You can use this kit to phone calls or recordings. Bill Integrated microphone is located on the top and it is important don't cover it with adhesive tape or skin.

The button allows:

  • 1 Click: Answer call or pause/play recordings
  • 2 Clicks: Redial the last number in the call log
  • Long press: Power off/on, pairing mode

El volume is controlled directly from the mobile phone. also proximity/distance to the penguin its volume will vary.

⚠ Some features may not be available on some phones, especially iPhones. Try another mobile phone, app or control the call/recording directly from the mobile phone.

Step 7 - Earpiece Removal, Battery, Battery Disconnect and Power Off

Remember to turn off the bluetooth part while not in use and while charging
See Percentage Battery Earpiece Nano V4 IPhone
See Battery Percentage Earpiece Nano V4 Samsung
See Battery Percentage Earpiece Nano V4 Xiaomi

El bluetooth t shirt battery percentage It can be consulted when we connect it to the mobile via bluetooth. Depending on the mobile will appear in the upper right corner of the screen or in Settings>Bluetooth.

Shutdown and Charge Vip Pro Bluetooth Piece
Step 4 Vip Pro Mini Earpiece

The battery life of the Inductor Vip Pro Bluetooth Piece is approximately 3 hours.

To charge it, connect it to the electrical network with the charging cable included in the kit and in a charger up to 5V and 1A. It will turn on a red light when plugged in. Estimated charging time is 1 hour. He device will be fully charged when the red light turns blue.

Remove the spy earpiece by pulling the transparent thread with your fingers. If you don't get it, you can try to pull the transparent thread with tweezers.

Lastly, remember to disconnect the battery when you finish using the spy headset to prevent it from discharging. As long as the battery is inside, it will continue to consume.

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Frequent Problems

the penguins can be complex products when putting them into operation. Check the Vip pro bluetooth piece frequent problems:

1 - Bluetooth device not listed

Vip Pro Bluetooth On Piece

To put the bluetooth piece in pairing mode must Press the button and DO NOT RELEASE until the lights flash Red and Blue. If you release it before (when the first blue lights appear) it will not go into pairing mode and it will not appear in bluetooth on your mobile. Connect your mobile turning on Bluetooth and search for the device “GB-T01”. Once connect your mobile for the first time will be linked to the device and it will connect automatically as long as Bluetooth is turned on on your mobile. If it doesn't turn on, you should charge it..

2 - The calls are not heard but the songs or recordings are heard

Mobile Bluetooth Connection Pinganillo

If you can listen to recordings or songs through the spy earpiece, but not phone calls, check:

  • If you use iPhone, during a phone call, click the speaker or bluetooth icon to activate the output through the bluetooth device.
  • If you are using another mobile phone, Also check that Bluetooth audio output is activated while you are on a call. This is usually a Bluetooth or speaker icon.
  • Check the settings when making the call.

⚠ If it doesn't work, try another mobile phone.

3 - Doesn't work

Clean Ear and Earpiece
Step 1 VIP Pro Mini
Vip Pro Bluetooth Piece Placement
  • Clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear.
  • Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you must use another new battery. The battery discharges even if the handset is not in use.
  • Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole).
  • Screw the cap back on checking let it remain correctly screwed.

If you hear a sound similar to that of a tuned radio when you put the spy earphone on your ear with the battery inserted, the spy headset is working and the problem is another.

Place the piece near your neck and the spy earpiece in the ear and make sure it is well connected to your mobile phone (see the first issue of common issues); next, Play a song at maximum volume and unmute it of your mobile phone. If it does not work, try restarting the phone.

Si you still can't hear the song, check again by placing the headset against the piece y Try another mobile phone, computer or tablet. Also try with another battery.

⚠ If you still can't get it to work, contact us via chat.

4 - I can't hear anything or very low

This is one of the most common problems in the penguins exist several possible reasons for which you hear nothing or very little. We are going to carry out a series of tests:
Clean Ear and Earpiece
Step 1 VIP Pro Mini
Vip Pro Bluetooth Piece Placement
  • Clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear.
  • Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you must use another new battery. The battery discharges even if the handset is not in use.
  • Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole).
  • Screw the cap back on checking let it remain correctly screwed.

If you hear a sound similar to that of a tuned radio when you put the spy earphone on your ear with the battery inserted, the spy headset is working and the problem is another.

Place the piece near your neck and the spy earpiece in the ear and make sure it is well connected to your mobile phone (see the first issue of common issues); next, Play a song at maximum volume and unmute it of your mobile phone. If it does not work, try restarting the phone.

Si you still can't hear the song, check again by placing the headset against the piece y Try another mobile phone, computer or tablet. Also try with another battery.

⚠ If you still can't get it to work, contact us via chat.

5 - A very loud sound sounds, like a bee

Untuned radio-like sound is normal in all Vip Pro spy headphones. It is due to the constant amplification of the inductive waves emitted by the inductive element.
If the sound is very loud, and You can hear it even when it's not in your ear, follow the steps below:
Step 4 Vip Pro Mini Earpiece

If the sound is very loud and can be heard even with the earphone out of the ear, unscrew the cap and Check that the battery is oriented with the positive + pole facing up and that the cap is screwed on correctly and aligned. If the problem persists, remove the cover again and Gently pull the spring inside the earphone with your fingernail or tweezers. Thus, will be deformed and contact will be made correctly. Can be necesario perform this adjustment occasionally or on first use.

6 - The button does not work or does not work as it should

Vip Pro Bluetooth Microphone Piece

⚠ Some features may not be available on some phones, especially iPhone. Try another mobile phone, app or control the call/recording directly from the mobile phone.

The button allows:

  • 1 Click: Answer call or pause/play recordings
  • 2 Clicks: Redial the last number in the call log
  • Long press: Power off/on, pairing mode

7 - The integrated microphone does not work

Vip Pro Bluetooth Microphone Piece

If the problem occurs with the integrated or wired microphone, check:

  • El phone has been restarted.
  • In the Official Mobile Voice Recorder or Memos application, the microphone does pick up sound.
  • In a phone call, the microphone picks up the sound.
  • Check the Bluetooth device settings on the mobile phone.
  • Try another phone or tablet.

8 - I can't extract the earpiece

Step 4 Vip Pro Mini Earpiece

Remove the earpiece pulling the transparent thread with your fingers. If it is not possible, you can try pull the transparent thread with some tweezers. Is It is advisable that another person remove it by us, since you will be able to see the thread better to pull it with the tweezers.

Lastly, remember to disconnect the battery when you are done before using the device to prevent it from discharging.

9 - The Earpiece has stopped working

Clean Ear and Earpiece
Step 1 VIP Pro Mini
  • Check that the battery is charged. If it has been left on the spy headset Even if you are not using it, it will be downloaded and you will need to use a new battery.
  • Check that earwax does not clog the speaker of the spy earpiece. If it is, clean it carefully with a needle or pin. Can be necessary to perform this step every few uses.
  • Si hear a sound similar to that of an untuned radio When you put the spy earphone in your ear with the battery inserted, the spy earphone is working and the problem is something else. Follow the steps for common problems (3 – I can't hear anything or very low).

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Security and Compliance

Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:

⚠ FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER DAMAGE OR INJURY.

WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.

Certifications and Warnings Products PingaOculto

® PingaOculto. All rights reserved.

Product specifications:

Model Name: Vip Pro Bluetooth Piece

Model Number:VP-10/VP-11

Product ID: 706212918415 / 706212918392

Product battery: Integrated Lithium-Ion type with 300 mAh capacity

Batteries Included: 2 x Silver Oxide Batteries type 337-SR416SW

Operating temperature: 0 to 35ºC

Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.

Legal notice: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.

For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.

Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.

How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.

Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.

Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.

Global Express Shipping

Anywhere in the world

14 days of Return

Up to 14 calendar days

3 Years Warranty

Quick and Efficient Management

Payment 100% Safe

PayPal / MasterCard / Visa