Instructions Spy Camera Wifi Pro

🇪🇸 - Select your language

- Select your language

- Wähle deine Sprache

???????? - Choose your language

🇵🇹 – Select your language

🇳🇱 – Selecteer je taal

- Välj ditt språk

- Wybierz swój język

Table of Contents

1 Instructions Spy Camera Wifi Pro

Description

The Wifi Pro Hidden Button Spy Camera for Exams has a very small size great to see computer screens or exams thanks to its sharpness and great 4K image quality.

The camera can be hidden in any item of clothing or accessory thanks to the included parts in the Kit. This model is very new to the allow manual focus adjustment directly from the camera based on distance to paper, screen, or environment. The central module and battery of the camera can be glued to the skin using adhesive tape or similar to improve its fixation during use.

Technical characteristics

The wifi spy camera has a very small size which allows it to be hidden in any item of clothing or accessory using the buttons and fixing piece included.

Recording and remote viewing 4K quality, perfect for maintaining a stable connection while watching a document or computer screen.

The camera connects to a wifi from a router or a wifi network created with the mobile and share the image in real time by Internet.

It incorporates a white inductive element to transmit the sound from the camera to the earpiece using the internet connection.

The lens allows adjust focus manually between a distance of 5 centimeters to focus on the environment.

Allows local recording automatically just insert a microSD and turn on the camera.

La camera autonomy is 4 hours thanks to the 1000 mAh battery included with the kit.

Kit Contents

1 – Wifi Spy Button Camera Module with Integrated/External 1000mAh Battery

2 – Microphone

3 – Inductor Element for Earpiece

4 – Button Kit

5 – Fixing Piece

6 – 5V/2A charger

7 – USB charging cable

8 – Reset clip

1 – Wifi Spy Button Camera Module with Integrated/External 1000mAh Battery

2 – Microphone

3 – Inductor Element for Earpiece

4 – Button Kit

5 – Fixing Piece

6 – 5V/2A charger

7 – USB charging cable

8 – Reset clip

9 – Vip Pro SuperMini earpiece

8 – 2 x 337/SR416SW batteries

1 – Wifi Spy Button Camera Module with Integrated/External 1000mAh Battery

2 – Microphone

3 – Inductor Element for Earpiece

4 – Button Kit

5 – Fixing Piece

6 – 5V/2A charger

7 – USB charging cable

8 – Reset clip

9 – Vip Pro UltraMini earpiece

10 – Extractor Bar

11 – 2 x 3797SR521SW Batteries

Instructions

Step 0 - PingaOculto Original Product

Check that it is a original PingaOculto product checking that the brand that appears on the cards or stickers included with the product is the same as the one in the image.

If you have doubts about whether the product is original, you can contact us by attaching an image and we will verify it. Contact us via: WhatsApp +34 644 098 320 o Email.

Step 1 - Charge the Battery

ATTENTION - It is very important that you charge the camera with a charger of maximum 2.0A at 5V. If you do it with a higher power it will not charge.

The battery is shipped with a low charge so you should charge it using the included cable and charger.

The module emits a red light while charging. When this charged the red light will turn off automatically

El charging time is about 4-6 hours when connected to a 2 amp charger. In case of connecting it to one with a lower amperage, its charging time will increase. You can check the amperage of your charger in the specifications on it (Example: 0.45A)

If the LED flashes red when connecting to the load You should try with another charger or plug.

Camera can be used while charging, But not recommended because it reduces battery life.

Check that the camera is turned off while charging.

Select your Kit

Step 2 - Configuring the Earpiece

Step 2.1 - Stack Introduction

ATTENTION - To remove the vip pro ultramini earpiece from the ear it is necessary that the battery is inserted in the earpiece.

You should NEVER insert the vip pro ultramini earpiece into your ear without first inserting the battery on the Earpiece or the extractor bar will not work.

Unscrew the black cap from the earpiece and insert the stack with the positive pole facing upwards.

Then screw the cap back on checking let it remain correctly screwed.

The battery begins to be consumed from the moment it is inserted on the earpiece and should withdraw if not to be used to avoid downloading.

Step 2.2 - Operation Check

This sound similar to an untuned radio is normal in all Vip Pro Earpieces. It is due to the constant amplification of the inductive waves emitted by the inductive collar. this sound decreases when playing a recording or call and when the battery charge is getting low

Bring the earpiece to your ear and check that you can hear a sound similar to an untuned radio. This sound indicates that you are powered on and working properly.

If the sound is very loud and can be heard without the earpiece in your ear, unscrew the cap and check that the battery is oriented with the positive pole + facing up and screw the cap back on carefully. If the lid or the battery are not aligned it will make this noise.

If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive + side facing up and screw the cap back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.

Step 2.3 - Introducing the Earpiece

Insert the earpiece into the left ear. You can also insert it on the right, but we usually hear more on the left than on the right. You can push the earpiece with your finger. It is not recommended to insert it too much, since it is not necessary to hide it.

Step 2.4 - Inductor Element Placement

The inductor element is the white piece that transmits the sound to the earpiece. must be on the neck or on the chest, staying close to the ear in which the earpiece is.

We can regulate the volume of the earpiece moving the inductor element closer or further away from the ear where the earpiece is

To talk to the penguin we have to long press the icon of a microphone in the application as we will see in the next steps.

Step 2.5 - Extract the Earpiece

VIP Pro SuperMini

Remove the earpiece by pulling the transparent thread with your fingers. If you don't make it, you can try pulling of the transparent thread with a tweezer.

Finally, remember to disconnect the battery when you finish using the device to prevent it from downloading.

⚠ If you can't extract it, contact us to help you: WhatsApp +34 644 098 320 o Email.

Vip Pro UltraMini

Remove the earpiece by inserting the removal bar into your ear. Remember that this is magnetized to the battery, so You should never insert the earpiece into your ear without first inserting the battery.

Finally, remember to disconnect the battery when you finish using the earpiece so it doesn't download.

⚠ If you can't extract it, contact us to help you: WhatsApp +34 644 098 320 o Email.

Step 3 - How to Use

ATTENTION - It is normal for the camera to get hot during use.. It is a matter of chip design and does not affect its operation.

The camera it can work in several ways:

Location: we must insert a microSD in the camera. When the camera is turned on it will automatically record both video and audio with the built-in microphone until it is turned off.
Remote with Wifi Router: The camera connects to the Wi-Fi network of a router with Internet to transmit remotely to any place in the world with Internet (no microSD needed in this mode).
Remote with Wifi Router Mobile Data: The camera connects to the Wi-Fi network that is created with a mobile with Internet using mobile data to transmit remotely to any place in the world with Internet (no microSD needed in this mode).

Select the Mode of Use

Step 4 - Local Mode

Step 4.1 - microSD introduction

To use the camera with *microSD you simply must insert the microSD card before turning on the camera. Then press the ON/OFF button and the camera will start recording. Testing is recommended before use checking that it is recorded correctly and the free size in the card.

It is convenient to download HDCameraPro app (links in the next step), connect to the wifi network created by the camera “HW-…” to configure it and adjust your focus. To do this, continue with the following steps in remote mode.

For turn off the camera, press and hold the ON/OFF button for 3 seconds Until all the lights go out.

*Maximum card size supported: 128GB

**Recommended format: FAT32

Step 5 - Remote with Wifi Router

Step 5.1 - Application Download

Download the HDCameraPro app on your mobile by pressing the Android or App Store (iPhone) icon depending on the model of your device.

En Android it is not possible to download it from the Play Store It is necessary to download it by clicking on the image or the link: https://www.pingaoculto.es/wp-content/uploads/2023/03/HDCameraPro_1.0.27.apk and then in the notification bar click on the downloaded file and install (allow installation from unknown sources if required for your installation).

You can see the steps below:

Step 5.2 - Application Permissions

When opening the app for the first time allow all required permissions.

It is important that the application has all the necessary permissions

Step 5.3 - Powering on the Camera

ATTENTION - It is normal for the camera to get hot during use.. It is a matter of chip design and does not affect its operation.

To turn on the camera press the ON/OFF button. A blue light will come on and when the camera has started up after 20 seconds a green light will come on flashing indicating it is ready to set up.

*If it doesn't blink only the green light it will not be possible to configure it and also to reset the camera if necessary We must enter the reset clip for 5 seconds with the camera on. Then wait 15 seconds for the process to finish.

If the camera does not turn on, it will be discharged and you must charge it with the included USB cable.

Step 5.4 - Wifi Camera Connection

Open the WiFi settings of your mobile phone y connect to the WiFi network HW-xxxx.

If you see a warning indicating If you want to keep the Wi-Fi connection even if you don't have internet, click on keep connection.

Step 5.5 - Camera View AP Mode and Focus Adjustment

If we have successfully connected to the wifi of the camera with name HW-xxxx When we open the application the camera icon will appear connected by Wifi mode/AP mode. This way allow Connect to the camera using the Wi-Fi created by the camera, which has a range of 6 meters.

For see the camera click on the center of the image. The green light will be solid without flashing.

Now we must adjust manual focus. For this we must rotate the lens (yellow shaded part in the image) holding the camera by the pink piece. No.or the camera must be held by the cable. according to the direction of rotation se zoom out or zoom in focus:

Turn clockwise = Farthest
Counterclockwise rotation = Closest

Es It is important to leave it correctly adjusted at the distance at which you want to focus the sheet, computer screen or environment.

Step 5.6 - Microphone

Click on the speaker icon to listen to the sound picked up by the camera's microphone. Remember to turn up the volume on your mobile and remove silent mode to listen.

Step 5.7 - Wifi connection to the Router

Open the main screen y Click on the + icon in the upper right corner.

Then select “Equipment AP distribution network”.

Click on "Start connecting" and then "NEXT".

If Device not found appears, our mobile is not connected to the camera's Wi-Fi (HW-xxxx) or some permission has yet to be given in the app.

Then click on “refresh" select the wifi of your router in the list y remember that it must be a 2.4Ghz type wifi.

Indicate the password of the router's Wi-Fi network and click on "Configure Wifi" and then in "Safe". In this step, our mobile phone, which is still connected to the camera's Wi-Fi (HW-xxxx), it will communicate to the camera the Wi-Fi network to connect to.

Then the camera will turn off Wi-Fi (HW-xxxx) and it will connect to the Wi-Fi network that we have communicated to it and in this step our mobile should automatically reconnect to the internet (wifi with internet or mobile data) to check if the camera has been configured correctly.

A timer will start and we have to wait for it to finish or for the main screen of the application to appear.

If “configuration failure” It is possible that the Wi-Fi network password is wrong, that our mobile has not reconnected to the Internet during the timer (Wi-Fi or mobile data) or that the router creates a 5GHz Wi-Fi network.

If the camera lights flash green and blue intermittently the camera has been set, but it does not detect the wifi network or the password is wrong. To repeat the configuration we must insert the clip included in the reset button of the camera for at least 5 seconds, reconnect to the camera's Wi-Fi (HW-xxxx) and repeat the steps.

If the camera lights are green and blue steady without flashing and the main screen of the app appears has been configured correctly.

Step 5.8 - Password

It will be necessary to enter a password for the camera twice on the first display in a pop-up window that will appear. The password must have a minimum of 6 characters. after writing it Click on “Sure”.

The camera will be configured and we can view it from anywhere in the world with internet (P2P mode), Remembering that The camera must always be close to the Wi-Fi network. to which it connects.

Remember the stability of the image depends on the quality of the wifi network connection to which the camera is connected and the mobile internet connection from which we see the camera.

Step 5.9 - Share Camera Access

Click on the main screen of the app on the share icon and then in “Save the QR Code to your phone“. The QR code will have been saved in the mobile gallery.

El Generated QR includes the UID or unique identifier from our camera. Must save and share it along with the camera password which was set in the previous step.

The other person to whom we have shared the QR code and password of the camera, while we keep the camera on, must install the app, open it and grant all requested permissions.

On the main screen of the application:

Click on the + button in the upper right corner.
Select "Mobile phone scanning QR code…".
Scan the QR Code.
Indicate the camera password.
Click on "Sure".

The camera will be configured and we can view it by clicking on the image of the camera on the main screen of the app.

At this point the camera will be set up and if the camera is on and the router is in range, it will automatically connect and start streaming by Internet.

As long as the camera is on, el Wireless to which we have connected it must be asset, with Internet y search of the camera.

Step 6 - Remote with Mobile Wifi Router

Step 6.0 - Configuration Scheme with Mobile Router

In remote use mode with mobile wifi router we will need two cell phones :

Mobile A: mobile than create a Wi-Fi network that the camera can connect to, get internet and stream live.
Mobile B: mobile that we will use for the initial configuration of the camera.

In the Mobile A will never need to download the application, its only function will be to act as a router creating a Wi-Fi network to which the camera connects.

Step 6.1 - Create Mobile Wifi Network A

Mobile A should always be close to the camera because create a Wi-Fi network that the camera can connect to, get internet and stream live.

Depending on the brand and model of the mobile, the way to create a Wi-Fi network will vary.. It is recommended to search Google for the brand and model of the mobile + wifi sharing; to know the exact steps.

Es It is important that the Wi-Fi network created is of the 2.4GHz type, for this we must:

Nap creating the wifi network with an iPhone enable the Maximize Compatibility option in the “Personal Hotspot” setting.
Si is using androidlook for a Setting that indicates network type, compatibility or similar in settings> Wi-Fi zone and activate it or change the network type to 2.4GHz.

Se It is recommended to review this configuration well eliminating automatic disconnections when not in use and general settings that can cause the created Wi-Fi network to be deactivated.

Step 6.2 - Download Mobile Application B

Download the HDCameraPro app on mobile B by pressing the Android or App Store (iPhone) icon depending on the model of your device.

You can see the steps below:

Step 6.3 - Powering on the Camera

ATTENTION - It is normal for the camera to get hot during use.. It is a matter of chip design and does not affect its operation.

To turn on the camera press the ON/OFF button. A blue light will come on and when the camera has started up after 20 seconds a green light will come on flashing indicating it is ready to set up.

If the camera does not turn on, it will be discharged and you must charge it with the included USB cable.

Step 6.4 - Wifi Camera Connection

Open the WiFi configuration of your mobile B y connect to the WiFi network HW-xxxx.

If you see a warning indicating If you want to keep the Wi-Fi connection even if you don't have internet, click on keep connection.

Step 6.5 - Camera View AP Mode and Focus Adjustment

For see the camera click on the center of the image. The green light will be solid without flashing.

Turn clockwise = Farthest
Counterclockwise rotation = Closest

Es It is important to leave it correctly adjusted at the distance at which you want to focus the sheet, computer screen or environment.

Step 6.6 - Microphone

Click on the speaker icon to listen to the sound picked up by the camera's microphone. Remember to turn up the volume on your mobile and remove silent mode to listen.

Step 6.7 - Mobile Wifi Camera Connection

Open the main screen y Click on the + icon in the upper right corner.

Then select “Equipment AP distribution network”.

Click on "Start connecting" and then "NEXT".

If Device not found appears, our mobile is not connected to the camera's Wi-Fi (HW-xxxx) or some permission has yet to be given in the app.

Then click on “refresh" select the wifi network created by mobile A in the list y remember that it must be a 2.4Ghz type wifi.

Enter the password of the Wi-Fi network created by mobile A and click on “Configure Wifi” and then in "Safe". In this step, our mobile phone, which is still connected to the camera's Wi-Fi (HW-xxxx), it will communicate to the camera the Wi-Fi network to connect to (mobile Wi-Fi network A).

Then the camera will turn off Wi-Fi (HW-xxxx) and it will connect to the Wi-Fi network that we have communicated to it and in this step our mobile B must automatically reconnect to the internet (wifi with internet or mobile data) to check if the camera has been configured correctly.

A timer will start and we have to wait for it to finish or for the main screen of the application to appear.

If “configuration failure” It is possible that the Wi-Fi network password is wrong, that our mobile has not reconnected to the internet during the timer (Wi-Fi or mobile data) or that mobile A creates a 5GHz Wi-Fi network.

If the camera lights flash green and blue intermittently the camera has been set, but it does not detect the wifi network of mobile A or the password is wrong. To repeat the configuration we must insert the clip included in the reset button of the camera for at least 5 seconds, reconnect to the camera's Wi-Fi (HW-xxxx) and repeat the steps.

If the camera lights are green and blue steady without flashing and the main screen of the app appears has been configured correctly.

Step 6.8 - Password

The camera will be configured and we can view it from anywhere in the world with internet (P2P mode), Remembering that The camera must always be close to the Wi-Fi network created by mobile A.

Remember the stability of the image depends on the quality of the Wi-Fi network connection of mobile A and the mobile internet connection from which we see the camera.

Step 6.9 - Share Camera Access

Click on the main screen of the app on the share icon and then in “Save the QR Code to your phone“. The QR code will have been saved in the mobile gallery.

El Generated QR includes the UID or unique identifier from our camera. Must save and share it along with the camera password which was set in the previous step.

The other person to whom we have shared the QR code and password of the camera, while we keep the camera on, must install the app, open it and grant all requested permissions.

On the main screen of the application:

Click on the + button in the upper right corner.
Select "Mobile phone scanning QR code…".
Scan the QR Code.
Indicate the camera password.
Click on "Sure".

The camera will be configured and we can view it by clicking on the image of the camera on the main screen of the app.

At this point the camera will be set up and if the camera is on and the wifi created by mobile A is in range, it will automatically connect and start streaming by Internet.

As long as the camera is on, el Wireless to which we have connected it must be asset, with Internet y search of the camera.

Step 7 - Camera Display Options

Play / Pause
Sound
Resolution Adjustment
Night Vision (On/Off/Auto)
Fullscreen
Image/Capture
Video
Gallery
Movement Alerts
Pinganillo Sound
Lights On/Off
Flip Image Vertically
Flip Image Horizontally
battery level
Connection Mode
Connection Quality, Signal Quality, Frames per Second
Chamber Name
Settings

Step 8 - Using the Earpiece

The inductor element is the white piece that transmits the sound to the earpiece. must be on the neck or on the chest, staying close to the ear in which the earpiece is.

We can regulate the volume of the earpiece moving the inductor element closer or further away from the ear where the earpiece is

To talk to the penguin, in the application, we must hold down in the application on the microphone icon.

Step 9 - Buttons and Fixing Piece

ATTENTION - It is very important not to bend the camera cable excessively.. Doing so will break connections and stop streaming video.

There are multiple ways to hide the camera in the clothes. The most common is on the sleeve, on a sweatshirt, jumper or shirt or in the neck concealed in a button.

Remember you can gesture to show paper or computer screen and that the other person who is viewing the camera remotely take a screenshot so that it is not necessary to hold the gesture for a long time.

The kit includes a garment fixing piece that must be sewn to the garment.

On the garment or accessory we must make a small hole where the lens is located The best sites are usually on the sleeve, on the neck or on the chest.

⚠ It is very important DO NOT pierce the camera cable when sewing it or it will be damaged and will be out of warranty.

If you don't know how to sew it You can look for a tutorial on YouTube on how to sew a 4-hole button. Use a thread of the color of the article of clothing so that it is hidden.

The buttons included can be glued to the camera with double-sided tape, with glue or similarly sewn to the fixing piece.

⚠ It is very important DO NOT pierce the camera cable when sewing it or it will be damaged and will be out of warranty.

If you don't know how to sew it You can look for a tutorial on YouTube on how to sew a 4-hole button. Use a thread of the color of the article of clothing so that it is hidden.

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Frequent Problems

spy cameras can be complex products when putting them into operation. Check the Frequent wifi spy camera problems.

1 - Does not turn on

The battery is shipped with a low charge so you should charge it using the included cable and charger.

The module emits a red light while charging. When this charged the red light will turn off automatically

If the LED flashes red when connecting to the load You should try with another charger or plug.

Camera can be used while charging, But not recommended because it reduces battery life.

Check that the camera is turned off while charging.

2 - The application requests a QR Code

Si you have not made the initial configuration of the camera You must follow the instructions from the "Step 5 – Remote Mode” of the instructions.

The other person to whom we have shared the QR code and password of the camera, while we keep the camera on, must install the app, open it and grant all requested permissions.

On the main screen of the application:

Click on the + button in the upper right corner.
Select "Mobile phone scanning QR code…".
Scan the QR Code.
Indicate the camera password.
Click on "Sure".

The camera will be configured and we can view it by clicking on the image of the camera on the main screen of the app.

3 - Does not connect

This is one of the most common problems. exist several possible reasons for which it does not connect. We are going to carry out a series of tests:

Check that the Wi-Fi network is 2.4 GHz and not 5GHz:

Nap sharing wifi with an iPhone enable the Maximize Compatibility option in the “Internet Sharing” settings.
Si is using androidlook for a Setting that indicates type of network, compatibility or similar in settings> Wi-Fi zone and activate it.
Si you are using a router, they normally have both the 2.4 GHz and 5GHz network enabled. Must connect to the one that does NOT have terms such as 5G, PLUS or similar in the Wi-Fi network name.

Go back to the HDCameraPro application and enter the password Wi-Fi network.

Check that after indicating the Wi-Fi network of the router/mobile, it connects correctly to Wi-Fi and the lights are solid blue and green on the camera.

⚠ If you can't connect the camera, please contact us To help you: WhatsApp +34 644 098 320 o Email. (We recommend contacting by WhatsApp for more fluid communication).

4 - The image is not visible in the application

Exit the application and re-enter. On the initial screen, click on the camera.
Si the camera appears as unavailable Check that the Wi-Fi to which the camera connects (the one we indicate in the application along with your password) be close to the camera and with internet.

⚠ If you can't see the picture, please contact us To help you: WhatsApp +34 644 098 320 o Email. (We recommend contacting by WhatsApp for more fluid communication).

5 - Wi-Fi "HW-..." does not appear

Lto Wi-Fi network* “HW-…” will appear approximately one minute after turning on the camera and the blue status light has turned off.

If the blue status light does not turn off, it means that it is already configured y must reset the camera by keeping the reset clip inserted for 5 seconds. The blue light will turn off and must of wait a minute for the camera to reset and the wifi “HW-…” appears.

If the mobile asks if you want keep wifi connection without internet connection select yes.

⚠ If the wifi “HW-…” does not appear, please contact us To help you: WhatsApp +34 644 098 320 o Email. (We recommend contacting by WhatsApp for more fluid communication).

6 - Doesn't work

If the camera is having problems, it is best to charge it and then reset it by holding the reset clip in for 7 seconds while it is on.

Turn on the camera and wait at least one minute.
Keep the reset clip inserted for 5 seconds.
wait 1 minute for the camera to reset. If the light flashes green it will be reset.

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Security and Compliance

Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:

🇪🇸 - Select your language

- Select your language

- Wähle deine Sprache

???????? - Choose your language

🇵🇹 – Select your language

🇳🇱 – Selecteer je taal

- Välj ditt språk

- Wybierz swój język

⚠ FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER DAMAGE OR INJURY.

⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.

Commercial Company: PingOc Now SL

Address: Calle Lucio del Valle 12, Local 1, 28003, Madrid, Spain.

Product specifications:

Model Name: Wifi Button Spy Camera

Model Number: CM-02

Product identifier: 706212918439

Product battery: Integrated Lithium-Ion type with 1000 mAh capacity

Batteries Included: 2 x Silver Oxide Batteries type 337-SR416SW or 379-SR512SW

Operating temperature: 0 to 35ºC

Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.

Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.

For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in compliance with Directive 2014/53/UE.

Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.

How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.

Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.

Limited Warranty: All official PingaOculto brand items have a 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.

Find Out More

Do you want to contact us?

follow us on

Instructions Spy Camera Wifi Pro

Description

Technical characteristics

Kit Contents

Instructions

Step 0 - PingaOculto Original Product

Step 1 - Charge the Battery

Step 2 - Configuring the Earpiece

Step 2.1 - Stack Introduction

Step 2.2 - Operation Check

Step 2.3 - Introducing the Earpiece

Step 2.4 - Inductor Element Placement

Step 2.5 - Extract the Earpiece

VIP Pro SuperMini

Vip Pro UltraMini

Step 3 - How to Use

Step 4 - Local Mode

Step 4.1 - microSD introduction

Step 5 - Remote with Wifi Router

Step 5.1 - Application Download

Step 5.2 - Application Permissions

Step 5.3 - Powering on the Camera

Step 5.4 - Wifi Camera Connection

Step 5.5 - Camera View AP Mode and Focus Adjustment

Step 5.6 - Microphone

Step 5.7 - Wifi connection to the Router

Step 5.8 - Password

Step 5.9 - Share Camera Access

Step 6 - Remote with Mobile Wifi Router

Step 6.0 - Configuration Scheme with Mobile Router

Step 6.1 - Create Mobile Wifi Network A

Step 6.2 - Download Mobile Application B

Step 6.3 - Powering on the Camera

Step 6.4 - Wifi Camera Connection

Step 6.5 - Camera View AP Mode and Focus Adjustment

Step 6.6 - Microphone

Step 6.7 - Mobile Wifi Camera Connection

Step 6.8 - Password

Step 6.9 - Share Camera Access

Step 7 - Camera Display Options

Step 8 - Using the Earpiece

Step 9 - Buttons and Fixing Piece

Frequent Problems

1 - Does not turn on

2 - The application requests a QR Code

3 - Does not connect

4 - The image is not visible in the application

5 - Wi-Fi "HW-..." does not appear

6 - Doesn't work

Security and Compliance