8GB Recorder Pen Instructions
Table of Contents
Pen Recorder 8GB
Technical characteristics
- Audio recording
- 8GB Integrated Storage
- Integrated Battery
Contents
Pen Recorder 8GB
MicroUSB-Jack 3.5 mm adapter
USB Charging and Transfer Cable
Headphones
Manual
Instructions
Step 1 - Load
It is necessary to charge the product before its first use. To charge the battery Connect the USB with the switch OFF to the USB port of a powered-on computer. El charging time is about 1,5 hours when connected to a charging from a USB port or a 5 Volt 1 Amp charger (
Maximum 5V 1A, if more amperage is used, the useful life will be reduced or the battery will stop working).
while charging the red light stays on and the charge is 100% when the blue light turns on.
Step 2 - Power On/Off, Recording and Playback
To turn on, first press the top button so that it is not pressed and then situate the switch inside the pen in position ON (switch position closest to the LED). The LED will turn on azul fixed indicating that it is on and in standby mode. Press the pen top button for start recording. The red LED will flash on and off, flashing every 5 seconds while recording. For stop recording, press again.
Audio files are limited to maximum 99 files in memory, so they must be moved to the computer regularly.
To activate the mode automatic recording by sound activation the pen must be turned on with the position of the top button in record.
If you connect the MicroUSB-3.5 mm Jack Port adapter We can listen to the recordings. While playing, the volume buttons:
- Volume + Button / Hold While Playing - Turn up the volume
- Volume + button / Press – Next Audio
- Volume Button – / Hold – Volume Down
- Volume button – / Press – Previous Audio
Pressing and holding the volume + button for more than 5 seconds while playing audio accesses the audio removal menu. For delete the current file, press the Play/Pause button once. Press the volume key – exit menu elimination.
Step 3 - Settings
To modify various parameters of the Recorder Pen connect via USB with cable included to a computer and open the file recset.txt.
- We can adjust the date and time of the files with the timeset.txt file opening it, pressing F5 to fill in the current time, and saving the file; or by running the .exe file to set the current computer time to the recorder.
- The BIT value allows adjust recording quality from 0 to 9 for the values 192/32/64/128/192/384/512/768/1024/1536Kbps respectively. TO The higher the value, the higher the recording quality. and the greater the battery consumption (except the number 0 which is the standard value). Settings 1 to 4 save files in the lowest quality format .MP3 and values 0 and 5 to 9 in the high quality file format .WAV.
- The GAIN value defines microphone sensitivity in the range from 1 to 7, with 7 being the most sensitive.
- The PART value corresponds to the minutes in which files will be split of recordings, with a range of 10-240min.
- The VOR value establishes the sound detection recording. The possible values are from 0 to 5, 0 being the deactivation of recording by sound detection (continuous recording, even if there are no sounds). The Values from 1 to 5 establish the sensitivity, with 1 being the least sensitive and 5 the most sensitive (activation with fewer decibels).
Remember save changes to file.
Frequent Problems
1 - Does not turn on
It is necessary to charge the product before its first use. To charge the battery Connect the USB with the switch OFF to the USB port of a powered-on computer. El charging time is about 1,5 hours when connected to a charging from a USB port or a 5 Volt 1 Amp charger (Maximum 5V 1A, if more amperage is used, the useful life will be reduced or the battery will stop working).
while charging the red light stays on and the charge is 100% when the blue light turns on.
2 - Does not store
There may be a problem with the file system or the battery. First Please check if your computer recognizes the Pen turned on and connected by USB. Then try formatting it in FAT32 format by previously doing a Backup of the files.
3 - Does not play
The files will be saved in MP3 format or WAV format. We can Search Google for a WAV to MP3 converter that plays most operating systems and devices or download the free VLC program for Windows or Mac that allows you to play WAV files.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model Name: 8GB Recorder Pen
Model Number:ME-03
Product identifier: 706212918430
Product battery: Integrated Lithium-Ion type with 120 mAh capacity
Operating temperature: 0 to 40ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Legal notice: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.