Full HD Spy Camera Pen Instructions
Pen Spy Camera Full HD
Technical characteristics
- Full HD recording
- High Quality Images
- Audio recording
- microSD storage
- Integrated Battery
Contents
Pen Spy Camera Full HD
USB Charging and Transfer Cable
2 x Replacement Inks
Reset Clip
Manual
Instructions
Step 1 - Load
It is necessary to charge the product before its first use. To charge the battery unscrew the pen to access the microUSB port and Plug in the included USB charging cable or connect directly to a computer's USB port. He charging time is about 1 hour when connected to a 5 Volt and 1 Amp charger (
Maximum 5V 1.0A, using more amperage will reduce the life of the battery built into the pen).
The device will start charging when the red led flashes and it will be fully charged when the red LED stops flashing.
Step 2 - Inserting microSD
The Full HD Spy Camera Pen requires a microSD of up to 64GB. The microSD can be changed using the microSD port on the inside of the pen. It is advisable to insert a microSD formatted in FAT32 format.
Step 3 - Power On/Off
Turn on the pen holding down the ON/OFF button 3 seconds until the blue LED flashing 3 times, and confirm power on by pressing the ON/OFF button once.
The pen is in a "standby" state waiting to start recording or capturing a photo.
At turn off the pen, repeat the procedure until all the LEDs turn off. The pen It will automatically turn off after 90 seconds in standby mode.
Step 4 - Video and Photography Recording
After turning on the pen Press the ON/OFF button twice in a row to take a photo. The blue LED will flash indicating that the photograph has been taken. The pen will return to standby status.
At Record a video, keep pressing the ON/OFF button. The blue LED will flash 3 times indicating that video recording has begun. For To stop video recording, press the ON/OFF button once again.
Step 5 - Adjust Watermark
To modify the watermark on videos connect via USB to a computer and open the Time.txt file.
We can adjust the date and time of the watermark. For example, if we want to indicate the date 10/06/2023 and time 12:00, we will modify the first line of text to:
2023/06/10 12:00:00 Y
In addition, we can activate/deactivate the mark of water changing between Y (activated) or N (deactivated).
Remember save changes to file.
Step 6 - Reset
If the pen freezes and does not react, we can force reset pressing with a paper clip in the reset hole.
Frequent Problems
1 - Does not turn on
It is necessary to charge the product before its first use. To charge the battery unscrew the pen to access the microUSB port and Plug in the included USB charging cable or connect directly to a computer's USB port. He charging time is about 1 hour when connected to a 5 Volt and 1 Amp charger (Maximum 5V 1.0A, using more amperage will reduce the life of the battery built into the pen).
The device will start charging when the red led flashes and it will be fully charged when the red LED stops flashing.
2 - Does not store
Enter the microSD into a computer and check that you can read it
La microSD it is recommended that you have FAT32 format.
Remember to use a microSD between 2 and 32GB.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model Name: Full HD Spy Camera Pen
Model Number:CE-12
Product identifier: 706212918430
Product battery: Integrated Lithium-Ion type with 260 mAh capacity
Operating temperature: 0 to 40ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Legal notice: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.